Robotics & Motion

SKU: EF-EF08292 | Brand: ElecFreaks

ELECFREAKS micro:bit Smart Cutebot Pro Robot Car Kit is a programming robot for STEAM education, it equips with a 4-way infrared line-following sensor, an encoder motor, the LED rainbow light, an ultrasonic sensor, a...

SKU: SF-ROB-11015 | Brand: SparkFun

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects....

SKU: LB-BIRDBIT | Brand: Little Bird

This robot is a graphical programming robot for STEM education utilising the simple programming of the micro:bit to achieve great results.   This compact robot is plug and play allowing children to quickly learn...

SKU: EF-EF09082 | Brand: ElecFreaks

EF92A is a kind of 180 deg analog servo. It is light and portable, a little bigger than 5 cent coin. It works at 3V voltage and can be used to make small robot modules, mechanical arm modules and intelligent car modul...

SKU: DF-SER0006 | Brand: DFRobot

A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces...

SKU: EF-EF11098 | Brand: ElecFreaks

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...

SKU: EF-11098 | Brand: ElecFreaks

This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...

SKU: LB-LR0006 | Brand: Little Bird

The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...

SKU: PR-PIM183 | Brand: Little Bird

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right ...

SKU: PH-103393 | Brand: PiHut

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak)...

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...

SKU: LB-LS1017-60 | Brand: Little Bird

The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suite...

SKU: LB-LR0309-57 | Brand: Little Bird

The servo tester and controller can be used as a signal generator for electronic speed controllers.   If you are looking for a low-cost way to get a servo up and running without any programming, you can plug d...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: EF-EF08209 | Brand: ElecFreaks

Documents Smart Cutebot kit

SKU: AF-3896 | Brand: Adafruit

A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – P...

SKU: LB-PT-SERVO | Brand: Little Bird

A compact 9 g continuous rotation micro servo that spins 360° in either direction, rather than moving to a fixed position like a standard servo. Control it with any servo library, code, or hardware — just set the sign...

SKU: AF-373 | Brand: Adafruit

This power jack is designed to fit 2.1mm power plugs snugly and securely. Perfect for adding a power connector to your project. We went for the more expensive "thin pin" type which snap into breadboards or perfboar...

SKU: DF-FIT0800 | Brand: DFRobot

A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...