Robotics & Motion

SKU: AF-4663 | Brand: Adafruit

The 6V Air Valve (FA0520E) is a 3-port solenoid valve for pneumatic systems, functioning similarly to an electrical relay. It features a common port (COM), a normally open port, and a normally closed port, allowing yo...

SKU: DF-FIT0662-1 | Brand: DFRobot

Note: The kits include two pairs of Mecanum wheels: two left-handed wheels and two right-handed wheels. Please pay attention to the L and R noted on the back of the product when installing,What wheels should...

SKU: EC-ARS27361T | Brand: Elecrow

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handle...

SKU: AF-4489 | Brand: Adafruit

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...

SKU: EF-EF09085 | Brand: ElecFreaks

SKU: EF-EF03423 | Brand: ElecFreaks

The Ring:bit expansion board is a simple PCB for the micro:bit. The Ring:bit extends the micro:bit's 3 GPIO ports. We will use this module to convert the P0/P1/P2 port to the common GVS port. It can be loaded 3 AAA ba...

SKU: YH-6000100127 | Brand: Little Bird

The Super:bit is a feature-rich expansion board that transforms the BBC micro:bit into the core of robotics and LEGO-compatible projects. With support for DC motors, stepper motors, and servos, plus onboard RGB LEDs a...

SKU: DF-SEN0250 | Brand: DFRobot

The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 ...

SKU: DF-FIT0579 | Brand: DFRobot

This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 m...

SKU: AF-3948 | Brand: Adafruit

A durable steel ball caster with smooth, fluid motion — ideal for providing a third contact point on small robot platforms. The 20mm overall height pairs well with common robot chassis and TT motor setups, and the two...

SKU: AF-3949 | Brand: Adafruit

A compact steel ball caster that provides smooth, omnidirectional movement for small robots and wheeled projects. With a 16mm overall height, it's well-suited as a third support point for two-wheeled robot chassis. E...

SKU: AF-3801 | Brand: Adafruit

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90 abou...

SKU: DF-SEN0245 | Brand: DFRobot

The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate distance measurement whatever the target reflection unlike traditional ...

SKU: AF-997 | Brand: Adafruit

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening project. There are two 1/2" (Nominal non-taped National Pipe) outlets. Normally, the va...

SKU: AF-1411 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with...

SKU: LB-00338 | Brand: Little Bird

Sphero is a robotic ball that can be controlled using a tablet or smartphone. Through simple text written to foster creativity and problem solving, students will the art of innovation. Large, colorful images show stud...

SKU: DF-FIT0185 | Brand: DFRobot

This 12 V DC geared motor (model GB37Y3530-12V-83R) pairs a powerful brushed motor with a 131:1 metal gearbox and an integrated Hall-effect quadrature encoder. The encoder provides 16 counts per revolution on the moto...

SKU: DF-FIT0199-R | Brand: DFRobot

These are typical rubber wheels for small robot mobile platforms. The tire is soft black rubber with light tread for added traction in rugged terrain. An axis adapter is needed which bolts to the back of the ...

SKU: SF-ROB-09065 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-i...

SKU: DF-SEN0116 | Brand: DFRobot

An AB two-phase optical encoder designed for the DFRobot 2WD MiniQ robot chassis. Uses two infrared reflective sensors to generate quadrature pulse waveforms with approximately 90° phase difference, allowing you to de...