Robotics & Motion
Everything you need to get things moving — motors, motor drivers, actuators, robotic arms, wheels, chassis kits and complete robot platforms, all in one place. Whether you're building a STEM project, programming your first robot, or engineering a custom motion system, this is your starting point.
Covering beginner-friendly kits through to professional-grade servo motors and encoders, our robotics range suits schools, makers, and engineers across Australia. Fast local shipping means your next build gets moving sooner.
3V vertical water pump
SKU: EF-EF11098 | Brand: ElecFreaks
This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...
Delivered by Fri 9 Oct
3V vertical water pump
SKU: EF-11098 | Brand: ElecFreaks
This compact DC micro submersible pump from ElecFreaks operates at 3V, making it easy to integrate into microcontroller-based projects. It comes equipped with male and female Dupont connectors for quick and simple wir...
Delivered by Fri 9 Oct
Arduino Infra-red obstacle sensor
SKU: LB-LR0006 | Brand: Little Bird
The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...
Delivered by Fri 9 Oct
Adafruit DC Stepper Motor HAT for Raspberry Pi - Mini Kit
SKU: AF-2348 | Brand: Adafruit
The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...
Delivered by Fri 9 Oct
12V GA25-370 DC Gear motor with Speed Encode 60 RMP
SKU: LB-LS1017-60 | Brand: Little Bird
The GA25-370 is a compact 12V DC gear motor with metal gears and a built-in speed encoder for closed-loop control. This 60 RPM variant uses a higher gear ratio for increased torque at lower speed, making it well-suite...
Delivered by Fri 9 Oct
50 piece plastic gear kit - DIY racer
SKU: LB-LS3638 | Brand: Little Bird
This 50-piece plastic gear kit contains everything you need to build a basic DIY racer chassis. The assortment of gears, axles, wheels, and structural parts gives you a foundation to create your own motorised car — th...
Delivered by Fri 9 Oct
Servo Tester and Speed Controler Power
SKU: LB-LR0309-57 | Brand: Little Bird
The servo tester and controller can be used as a signal generator for electronic speed controllers. If you are looking for a low-cost way to get a servo up and running without any programming, you can plug d...
Delivered by Fri 9 Oct
Hobby Motor - Gear
SKU: SF-ROB-11696 | Brand: SparkFun
This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...
Delivered by Fri 9 Oct
3-Bladed Trifoil Propeller Fan for DC Motor
SKU: AF-3896 | Brand: Adafruit
A 3-bladed trifoil propeller designed to snap onto standard DC hobby motors. Great for making simple fans, wind-powered experiments, bubble machines, or lightweight propulsion projects. Key Features Snap-On Fit – P...
Delivered by Fri 9 Oct
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
SKU: AF-3297 | Brand: Adafruit
The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...
Delivered by Fri 9 Oct
Amphibious Horizontal Submersible Pump
SKU: DF-FIT0800 | Brand: DFRobot
A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...
Delivered by Fri 9 Oct
122 Piece DIY wheels, motors and gears
SKU: LB-LS3639 | Brand: Little Bird
A 122-piece assortment of wheels, motors, and gears for quick prototyping and hands-on tinkering. This kit gives you the mechanical building blocks to create simple motorised chassis, spinning art projects, and other ...
Delivered by Fri 9 Oct
8 Channel 12V Relay Module 10A USB
SKU: LB-LS1773-12V | Brand: Little Bird
An 8-channel 12V relay module with USB-A interface for computer-based control. Uses the ULN2803 relay driver chip and genuine Songle relays for stable operation. Each relay is rated for 10A switching. Features both a...
Delivered by Fri 9 Oct
2x1.2A DC Motor Driver (TB6612FNG)
SKU: DF-DRI0044 | Brand: DFRobot
The DFRobot 2×1.2A DC Motor Driver is a compact dual-channel motor driver based on the TB6612FNG IC. It requires only four GPIO pins to control two DC motors, using the same control logic as the DFRobot L298N motor dr...
Delivered by Fri 9 Oct
Gravity: 16A Relay Module For Arduino
SKU: DF-DFR0251 | Brand: DFRobot
A relay is an electrically operated switch, which has a control system (also known as the input circuit) and the controlled system (also known as the output circuit), usually used in automatic control circuit. It i...
Delivered by Fri 9 Oct
Wheel - 65mm (Rubber Tire, Pair)
SKU: SF-ROB-13259 | Brand: SparkFun
These are a pair of basic, 65mm wheels with black rubber tires. These wheels are the same ones designed to fit onto DAGUs right angle gear motors utilized in the Magician Chassis and RedBot Kit. With these wheels you ...
Delivered by Fri 9 Oct
Micro bit DRV8833 Motor Driver Expansion Board
SKU: KS-KS4033 | Brand: Keyestudio
The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwi...
Delivered by Fri 9 Oct
micro:Maqueen Mechanic Attachment
SKU: DF-ROB0156-L | Brand: DFRobot
Note: the Maqueen robot, micro:bit and batteries are not included — this is the attachment kit only. A bolt-on mechanism that turns a Maqueen into a working machine. Each kit is a metal-gear servo, an anodised alumin...
Delivered by Fri 9 Oct
Hall-Effect Sensor - AH1815 (Non-Latching)
SKU: SF-SEN-14709 | Brand: SparkFun
The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sen...
Delivered by Fri 9 Oct
Micro DIY Helicopter DC Motor
SKU: LB-LS0461 | Brand: Little Bird
A micro coreless DC motor commonly used in DIY helicopters, drones, and small vibration projects. The compact 6 × 12 mm form factor and lightweight design make it ideal for weight-sensitive applications. Specificatio...
Delivered by Fri 9 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
