Robotics & Motion

SKU: DF-ROB0147 | Brand: DFRobot

Max:Bot An entry-level DIY robot that maximizes children’s creativityWhat is Max:Bot?Max:Bot is a programmable toy for 8+ years old kids to learn about robotics.Learn RoboticsCreate your kid’s own inventionRoboti...

SKU: MR-CB-KT-DISCOVERY-1 | Brand: Modular Robotics

Better thinking through play.The Cubelets Discovery Set is the perfect introduction to the world of Cubelets® robot blocks. Open a box of little robots that will intrigue, fascinate, and inspire builders for hours on ...

SKU: PL-3434 | Brand: Pololu

This is a full set of replacement gears for the Power HD High-Torque Servo 1501MG.

SKU: SF-ROB-09571 | Brand: SparkFun

The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the directio...

SKU: SF-ROB-10507 | Brand: SparkFun

The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable o...

SKU: MR-CB-KT-FLASHLIGHT-1 | Brand: Modular Robotics

The Flashlight Cubelet is an action block for the Cubelets modular robotics system. It emits a focused beam of white light from a powerful LED, with brightness proportional to its input value — high input means bright...

SKU: MR-BRIGHT | Brand: Modular Robotics

The Brightness Cubelet has an analog photocell that responds to varying light conditions and detects the amount of light hitting it’s sensor. Expect values near zero in a dark room, and values near one when the ...

SKU: MR-CB-KT-DISTANCE-1 | Brand: Modular Robotics

The Distance Cubelet detects how far it is from an object. It uses infrared light and is accurate between 10 and 80 cm. The sensor is directional, so outputs the distance to the object in front of the sensor. At...

SKU: SF-DEV-09627 | Brand: SparkFun

Developed by Dave Vondle and IDEO Labs, this board is essentially the same as our Power Driver Shield, but the through-hole parts have been switched out for smaller SMD construction, allowing you to to drive high-curr...

SKU: SF-COM-11041 | Brand: SparkFun

A bare PCB for building a relay control circuit, based on SparkFun's Controllable Power Outlet tutorial. It allows you to switch high-voltage loads using a simple 0–5V GPIO signal from any microcontroller. Components ...

SKU: PL-3712 | Brand: Pololu

A compact 6V brushed DC gearmotor with long-life carbon brushes and a 25:1 metal spur gearbox. This version includes an extended 6 × 2mm motor shaft at the rear, useful for attaching encoder wheels or other feedback m...

SKU: DF-FIT0006 | Brand: DFRobot

This is a mounting bracket designed for our URM ultrasonic sensor series.It is fully compatible with URM37 and URM04. You can also have this item with only 300 reward points. SPECIFICATIONS Mounting Pitch: 14mm(0....

SKU: PL-2508 | Brand: Pololu

This shield makes it easy to build an Arduino-controlled Zumo robot. The shield mounts onto an assembled Zumo chassis, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into ...

SKU: PL-1587 | Brand: Pololu

A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearb...

SKU: PL-1576 | Brand: Pololu

A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gear...

SKU: PL-2481 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...

SKU: PL-2454 | Brand: Pololu

The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...

SKU: SF-ROB-12350 | Brand: SparkFun

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SKU: SF-ROB-12316 | Brand: SparkFun

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stall torque of 9 oz-in. and a max speed of 900 RPM. Each micro gearmot...

SKU: DF-KIT0020 | Brand: DFRobot

An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...