Robotics

SKU: AF-1175 | Brand: Adafruit

A machined aluminium flexible shaft coupler for connecting two 5mm shafts. The spiral-cut design provides slight flexibility to accommodate minor misalignment between shafts, reducing binding without introducing rotat...

SKU: SF-ROB-13177 | Brand: SparkFun

The Micro Gripper Kit B is a compact robotic gripper designed for small-scale robotics projects. It works with any sub-micro size Hitec servo (not included) and features the standard 0.77" hub mount pattern for easy i...

SKU: DF-DRI0001 | Brand: DFRobot

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for mot...

SKU: LB-LS7259-360 | Brand: Little Bird

A durable 9G micro servo with full metal gears and 360° continuous rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact b...

SKU: DF-DFR1199 | Brand: DFRobot

An all-in-one stepper motor module combining the 28BYJ-48 geared stepper with an A4988 driver on a single board. The simplified 4-pin interface (STEP, DIR, 5V, GND) connects directly to Arduino, Raspberry Pi, or ESP32...

SKU: DF-MBT0050-AA | Brand: DFRobot

The Maqueen Plus V3 is an advanced programmable STEM robot designed for primary and secondary school robotics education and competitions. Powered by a micro:bit controller (sold separately), it combines a matrix laser...

SKU: WS-31512 | Brand: Waveshare

Unleash unparalleled power and precision into your robotic and RC projects with our 20kg.cm / 35kg.cm Large Torque 180° Digital Servo. With options for both robust copper and steel gears, this servo is designed to mee...

SKU: DF-SER0063 | Brand: DFRobot

##Introduction This is an extraordinary water-resistant digital servo with formidable torque, possessing a torque capacity of 20kg and a controllable angle of 180 degrees. It exhibits enhanced linear motion and featur...

SKU: ED-035014-01-S | Brand: Edtechs

Build & disassemble Compatible with Ozobot Blockly & Evo App Drive Control Ozobot Crawler offers a new dynamic to programming Evo that challenges students to think beyond conventional bot movement. Crawler comes...

SKU: EF-EF09087 | Brand: ElecFreaks

The Geekservo Motor is a compact DC motor designed to be fully compatible with LEGO building systems. Its LEGO-compatible mounting points let you integrate motorised movement directly into brick-based builds, making i...

SKU: DF-SEN0304 | Brand: DFRobot

DFRobot URM09 is an ultrasonic sensor specifically designed for fast ranging and obstacle avoidance application. Its measuring frequency can reach up to 50Hz. The sensor adopts built-in temperature compensation and I2...

SKU: MR-CB-KT-DRIVE-1 | Brand: Modular Robotics

The Drive Cubelet is an action block in the Cubelets robot construction system. It contains a motor and roller wheels that move along a horizontal surface — higher input values drive it faster, while a value of zero b...

SKU: DF-SEN0014 | Brand: DFRobot

The Sharp distance sensors are a popular choice for many projects that require accurate distance measurements. This IR sensor is more economical than sonar rangefinders, yet it provides much better performance than o...

SKU: SF-ROB-12567 | Brand: SparkFun

This buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when something interesting (or terrible) happens. The buzzer works by making use of two I/O pi...

SKU: SF-ROB-09454 | Brand: SparkFun

The SparkFun QRE1113 Line Sensor Breakout (Digital) is a compact IR reflectance sensor board that outputs a digital signal based on surface reflectivity. It uses a capacitor discharge circuit — the faster the 10 nF ca...

SKU: PL-3753 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...

SKU: SF-ROB-28015 | Brand: SparkFun

The Experiential Robotics Platform (XRP) is a hands-on, comprehensive robotics platform. It includes everything needed to build and program a robot to perform beginner through advanced tasks - building the foundation ...

SKU: DF-FIT0006 | Brand: DFRobot

This is a mounting bracket designed for our URM ultrasonic sensor series.It is fully compatible with URM37 and URM04. You can also have this item with only 300 reward points. SPECIFICATIONS Mounting Pitch: 14mm(0....

SKU: SF-ROB-11965 | Brand: SparkFun

A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and m...

SKU: SF-SEN-11769 | Brand: SparkFun

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...