Robotics

SKU: DF-ROB0153 | Brand: DFRobot

If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator. He is an agile tracked robot chassis, low noise, and easy to control, which could be a good partner for your any tank-li...

SKU: DF-DFR0429 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecti...

SKU: LB-SERVO-3003 | Brand: Little Bird

High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break...

SKU: SF-ROB-13302 | Brand: SparkFun

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor als...

SKU: WS-25076 | Brand: Waveshare

The Waveshare UGV02 is a 6-wheel, 4WD off-road mobile robot chassis designed for robotics development and autonomous navigation projects. With flexible rubber tyres, independent suspension, and four driven wheels, it ...

SKU: DF-DFR0332 | Brand: DFRobot

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...

SKU: EF-EF10154 | Brand: ElecFreaks

ELECFREAKS is an official Partner of micro:bit Educational Foundation focusing on developing educational and creative micro:bit accessories for the world. We devote to providing the most complete and excellent product...

SKU: EC-ACS70028DH | Brand: Elecrow

The Dual Channel H-Bridge Motor Shield is composed of 2 discrete MOSFET H-bridge, designed to drive two DC motor with max current 8A. It is made up of 8 N-channel MOSFET IRF3205S and 4 pcs of half bridge motor control...

SKU: SF-ROB-16413 | Brand: SparkFun

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is dete...

SKU: DF-FIT0085 | Brand: DFRobot

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: PL-1089 | Brand: Pololu

This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The white plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy install...

SKU: PL-954 | Brand: Pololu

This light ball caster uses a 3/4″ diameter plastic ball. The height of the assembled kit ranges from 0.9″ to 1.2″, depending on the combination of included spacers used. Included dowel pins can be used to reduce the...

SKU: DF-FIT0495-A | Brand: DFRobot

A compact all-metal DC gearmotor family from DFRobot, sold here as one motor in seven gear ratios. Every version shares the same 6 V brushed motor, the same 4 mm D-shaped output shaft and the same mounting f...

SKU: DF-SEN0017 | Brand: DFRobot

This is a line tracking (following) sensor to guide your robot by telling white from black quickly and accurately. It is commonly used in arduino robot project, and probably is the best line following sens...

SKU: SF-ROB-09453 | Brand: SparkFun

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applic...

SKU: DF-SER0060 | Brand: DFRobot

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mech...

SKU: DF-FIT0795 | Brand: DFRobot

A pack of four coreless micro motors measuring 8 × 16 mm, reaching 50,000 RPM at 3.7V. With the widest diameter and highest current draw (170 mA) in the coreless micro motor range, these deliver the most torque — idea...

SKU: EF-EF09083 | Brand: ElecFreaks

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. T...

SKU: AF-3882 | Brand: Adafruit

What's this? A record player for ants?? Not at all! This is a DVD/CD Spindle Motor, that thing that's inside a CD or DVD player, that turns the disc around really fast. These motors have some great benefits that ma...