Robotics

SKU: LB-LR0259 | Brand: Little Bird

This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 ...

SKU: LB-LS6502 | Brand: Little Bird

The MG996 Servo is a robust, high-torque servo designed for demanding applications. An upgrade to the popular MG995, this servo offers improved precision and performance with a redesigned PCB and IC control system. Fe...

SKU: DF-SER0006 | Brand: DFRobot

A lightweight 9g micro servo with 1.6 kgf·cm of torque at 4.8V. Ideal for small-scale robotics, beam robots, and automation tasks where a compact, affordable servo is needed. At only 9 grams, it fits into tight spaces...

SKU: LB-SERVO-3003 | Brand: Little Bird

High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break...

SKU: DF-DFR0332 | Brand: DFRobot

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...

SKU: DF-FIT0521 | Brand: DFRobot

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds ...

SKU: DF-SER0060 | Brand: DFRobot

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mech...

SKU: EF-EF10159 | Brand: ElecFreaks

ELECFREAKS Mechanical Catch (Use With Cutebot) is a gripper that uses an SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasin...

SKU: SF-ROB-09065 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-i...

SKU: DF-FIT0482 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: WS-24702 | Brand: Waveshare

The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding rob...

SKU: WS-31512 | Brand: Waveshare

Unleash unparalleled power and precision into your robotic and RC projects with our 20kg.cm / 35kg.cm Large Torque 180° Digital Servo. With options for both robust copper and steel gears, this servo is designed to mee...

SKU: DF-SER0063 | Brand: DFRobot

##Introduction This is an extraordinary water-resistant digital servo with formidable torque, possessing a torque capacity of 20kg and a controllable angle of 180 degrees. It exhibits enhanced linear motion and featur...

SKU: PL-993 | Brand: Pololu

A miniature low-power brushed DC motor with a 29.86:1 metal gearbox, designed for robotics and compact mechanical projects. The 6V LP (Low Power) variant draws minimal current while delivering useful torque through th...

SKU: PL-1590 | Brand: Pololu

This Pololu 25D metal gearmotor combines a low-power 6V brushed DC motor with a 377.93:1 metal spur gearbox. The high gear ratio delivers substantial torque at low speed, making it well suited for applications that ne...

SKU: PL-3712 | Brand: Pololu

A compact 6V brushed DC gearmotor with long-life carbon brushes and a 25:1 metal spur gearbox. This version includes an extended 6 × 2mm motor shaft at the rear, useful for attaching encoder wheels or other feedback m...

SKU: PL-1587 | Brand: Pololu

A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearb...

SKU: PL-1576 | Brand: Pololu

A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gear...

SKU: SF-ROB-11965 | Brand: SparkFun

A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and m...