Robotics

SKU: LB-LR0006 | Brand: Little Bird

The infrared obstacle sensor is a compact IR proximity module designed for robotics and automation projects. It detects obstacles within a 2–40 cm range and outputs a TTL-level signal, making it easy to integrate with...

SKU: LB-OWL-CHASSIS-V2 | Brand: Little Bird

Looking for a Robot Chassis?  Check out our 2 Wheel Robot Chassis.  Perfect for adding your own electronics to.  It comes with two motors which can be connected to your Arduino, Micro:Bit or Raspberry p...

SKU: LB-LR0005 | Brand: Little Bird

The Line Trace Sensor Module uses an infrared emitter/detector pair to measure the reflectivity of a surface below it. When the reflectivity exceeds an adjustable threshold, the output goes low — making it ideal for b...

SKU: LB-LR0401 | Brand: Little Bird

This compact module is built around the L3G4200D, a low-power 3-axis angular rate sensor with temperature data output. It measures the rate of change in rotation on the X, Y and Z axes, making it useful for motion sen...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...

SKU: EF-EF10159 | Brand: ElecFreaks

ELECFREAKS Mechanical Catch (Use With Cutebot) is a gripper that uses an SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasin...

SKU: PL-2485 | Brand: Pololu

The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes rea...

SKU: EC-SPS40201S | Brand: Elecrow

This Elecrow 4-channel IR reflective sensor module combines four infrared emitter/receiver pairs with a mainboard that processes all signals. When an object enters the detection range, the corresponding channel output...

SKU: LB-OTTO | Brand: Little Bird

Build a functional, interactive Otto-style robot with a bundled set of electronics for sensing, movement, control and power. This kit is designed to help you assemble a robot that can detect objects in its path and mo...

SKU: IT-IM120417005 | Brand: Little Bird

MotoMama is an Arduino shield built around the L298N H-bridge driver chip for small motor and robot projects. It can drive two DC motors or one four-wire, two-phase stepper motor.Motor power can be supplied through th...

SKU: PI-COM-B003 | Brand: Pimoroni

If you want to be a smooth operator then analog input is essential! This mini operators' joystick uses two 10KΩ potentiometers and a spring-back system for the X and Y axes making it a great input devi...

SKU: DF-DFR1199 | Brand: DFRobot

An all-in-one stepper motor module combining the 28BYJ-48 geared stepper with an A4988 driver on a single board. The simplified 4-pin interface (STEP, DIR, 5V, GND) connects directly to Arduino, Raspberry Pi, or ESP32...

SKU: PL-2510 | Brand: Pololu

Overview A Zumo robot preparing to attack a Parallax SumoBot. Zumo Robot for Arduino, v1.2. This Zumo robot is a low-profile tracked robot platform intended for use with an Arduino (or compatible device, such...

SKU: PL-2454 | Brand: Pololu

The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...

SKU: SF-SEN-11769 | Brand: SparkFun

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...

SKU: SF-ROB-12629 | Brand: SparkFun

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing relia...

SKU: DF-SEN0002 | Brand: DFRobot

The URM04 Ultrasonic sensor is developed based upon our popular URM37 ultrasonic sensor, it is using RS485 interface which allows multiple sensors to be used simultaneously . The RS485 interface allows a number of...