Raspberry Pi

SKU: DF-FIT0817 | Brand: DFRobot

Keep your Raspberry Pi running cooler with this compact aluminium heatsink and fan kit for Raspberry Pi 3B, 3B+ and 4B boards. The main heatsink uses a slotted surface to help dissipate heat from the CPU.Two 7 mm 9-bl...

SKU: DF-FIT0818 | Brand: DFRobot

This heatsink kit is a simple cooling upgrade for a Raspberry Pi 4B, helping draw heat away from key components during use.The black aluminium heatsinks use a slotted surface design to improve heat dissipation, and ea...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: DF-SEN0628 | Brand: DFRobot

This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interacti...

SKU: SF-DEV-19958 | Brand: SparkFun

This evaluation board combines the Raspberry Pi RP2040 microcontroller with a W5500 hardwired TCP/IP controller, giving you a Pico-style development platform with built-in Ethernet.The board works much like a Raspberr...

SKU: SF-DEV-26586 | Brand: SparkFun

The W55RP20-EVB-Pico is an evaluation board for the W55RP20, a chip that combines the W5500 wired TCP/IP controller with the RP2040 microcontroller. It works much like a Raspberry Pi Pico, with the addition of W5500-b...

SKU: SF-SEN-16826 | Brand: SparkFun

Bring 60GHz radar sensing into your project with the Acconeer A111 single-chip pulsed coherent radar sensor on a SparkFun breakout board. It is suited to high-precision distance measurement, and also supports gesture,...

SKU: SF-SEN-24049 | Brand: SparkFun

This economical ultrasonic module provides non-contact distance measurement for range-finding and obstacle-detection projects. It measures from 2cm to 400cm, with ranging accuracy that can reach up to 3mm.Each module ...

SKU: SF-PRT-30976 | Brand: SparkFun

This fanless aluminium case gives Raspberry Pi systems a fully enclosed, passively cooled housing. The solid aluminium chassis acts as a heatsink, drawing heat away from the processor through integrated thermal pads f...

SKU: AF-6115 | Brand: Adafruit

Add a bright red 16x8 LED matrix to your Raspberry Pi with this Adafruit CharliePlex LED Matrix Display Bonnet. It sits on any Raspberry Pi computer with a 2x20 connector, giving you a compact grid of 128 charlieplexe...

SKU: SF-GPS-29890 | Brand: SparkFun

Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-tim...

SKU: SF-KIT-17727 | Brand: SparkFun

Got a Raspberry Pi 4 ready to go? This bring-your-own-Pi kit bundles the accessories needed to turn an HDMI monitor into a Raspberry Pi desktop PC or media centre, without including the Raspberry Pi board itself.The k...

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: AF-6358 | Brand: Adafruit

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the ...

SKU: SF-COM-28236 | Brand: SparkFun

This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, ...

SKU: DF-DFR0767-2 | Brand: DFRobot

This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using ...

SKU: DF-DFR0767-3 | Brand: DFRobot

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around t...