Raspberry Pi

SKU: DF-SEN0549 | Brand: DFRobot

This Gravity: liquid flow sensor is designed based on the electromagnetic principle. It adopts an O-ring rubber seal and uses silicone sealant at the outlet end to strength water-resistance. With high anti-interferenc...

SKU: DF-ROB0182 | Brand: DFRobot

This Raspberry Pi robotic arm will definitely lead you to a wonderful robot programming world! Based on a Raspberry Pi microprocessor and built-in Ubuntu system, this small but powerful Raspberry Pi Six-axis Robotic A...

SKU: DF-ROB0182-2 | Brand: DFRobot

This Raspberry Pi-powered six-axis robotic arm is a compact, all-in-one platform for robotics programming, ROS simulation, and algorithm development. Built around the Broadcom BCM2711 (Raspberry Pi 4) with a built-in ...

SKU: SF-SEN-19833 | Brand: SparkFun

The SparkFun Qwiic Micro Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 21-bit) and uses a gel-filled cavity to provide extra res...

SKU: PL-5035 | Brand: Pololu

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Mo...

SKU: SB-PICUBE-RED | Brand: Little Bird

PiCube is a 4x4x4 LED cube HAT for Raspberry Pi with 5V DC operating voltage. PiCube, a monochromatic( Red, Blue, Green) LED with 64, is the latest product in the range of technologically advanced devices of SB Compo...

SKU: AF-5403 | Brand: Adafruit

Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained ap...

SKU: WS-21738 | Brand: Waveshare

The CM4-Duino is an Arduino-compatible base board for the Raspberry Pi Compute Module 4. It breaks out the CM4's key interfaces — HDMI, USB, M.2 NVMe, camera, and GPIO — in a compact form factor with Arduino-style pin...

SKU: WS-21708 | Brand: Waveshare

A 5G cellular HAT for Raspberry Pi built around the SIM8202G-M2 module on Qualcomm's Snapdragon X55 platform. Supports 5G NSA and SA networking alongside 4G and 3G fallback, plus multi-constellation dual-band GNSS pos...

SKU: SF-PGM-19262 | Brand: SparkFun

The Mates Programmer is a simple USB programmer for all Breadboard Mates products, providing a simple five-way programming interface and selection option for programming other devices such as “barebones” Arduino (Atme...

SKU: WS-21705 | Brand: Waveshare

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting...

SKU: AF-5386 | Brand: Adafruit

A 26-pin flexible flat cable (FPC) with 1mm pitch, 20cm in length. FPC cables are ultra-thin and flexible, making them ideal for tight spaces where round cables would be too bulky. This cable is commonly used for conn...

SKU: AF-5367 | Brand: Adafruit

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocryst...

SKU: WS-21322 | Brand: Waveshare

The Waveshare 10.5" AMOLED Touch Display delivers stunning 2K visuals at 2560×1600 resolution with 4.09 million self-emitting pixels. Unlike traditional LCD panels, the AMOLED technology provides true black levels (vi...

SKU: DF-DFR0909 | Brand: DFRobot

This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, up to 23 Relays and 6 Interrupts. It also contains several...

SKU: DF-DFR0908 | Brand: DFRobot

This equipment based on the Raspberry Pi technology is designed for professional use.This PLC has up to 36 Digital Inputs, 16 Analog Inputs, 8 Analog Outputs, and 6 Interrupts.It also contains several communication po...

SKU: DF-FIT0807 | Brand: DFRobot

PiTray clip is a Din Rail mounter for Single Board Computers like Raspberry Pi. Assembled of a 304 Stainless Steel blended plate and nylon clip with spring, it provides a simple, quick, strong, and durable Din Rail in...

SKU: DF-SEN0338 | Brand: DFRobot

A high-performance night vision camera module for Raspberry Pi, built around the Sony IMX327 STARVIS sensor. Designed for excellent low-light imaging without infrared fill light, this 2MP module delivers 1080p video a...

SKU: WS-16712 | Brand: Waveshare

A large 10.3" flexible e-ink display HAT for Raspberry Pi, featuring 1872×1404 resolution (~227 DPI) with 2–16 greyscale levels. The flexible panel is thinner and lighter than standard e-Paper displays, and the IT8951...

SKU: DF-DFR0789-B | Brand: DFRobot

This is a simple LED-illuminated self-lock switch button. It’s just like a basic switch button, but it lights up color(red/yellow/green/blue/white) when pressed down, which gives you visual feedback. These little butt...