Raspberry Pi

SKU: SF-GPS-29889 | Brand: SparkFun

Add survey-grade positioning to a Raspberry Pi with this GNSS Flex pHAT bundle, combining a Flex pHAT carrier, Septentrio mosaic-X5 RTK GNSS receiver and Feyman IM19 IMU. It is designed for high-precision positioning,...

SKU: SF-GPS-30384 | Brand: SparkFun

Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosai...

SKU: SF-KIT-16327 | Brand: SparkFun

Build a movable camera system around a Raspberry Pi Zero W with this kit. It brings together the Zero W, Raspberry Pi Camera Module V2 and SparkFun Pi Servo pHAT to create a pan/tilt camera for IoT projects.Use it for...

SKU: SF-KIT-17727 | Brand: SparkFun

Got a Raspberry Pi 4 ready to go? This bring-your-own-Pi kit bundles the accessories needed to turn an HDMI monitor into a Raspberry Pi desktop PC or media centre, without including the Raspberry Pi board itself.The k...

SKU: SF-KIT-28667 | Brand: SparkFun

Add vision and touch control to the Experiential Robotics Platform (XRP) Kit without soldering. This kit combines a Red Vision Touch Display for Pico with a compatible Himax HM01B0 colour camera board, enabling live i...

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0639 | Brand: DFRobot

This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a th...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: AF-6358 | Brand: Adafruit

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the ...

SKU: SF-COM-28236 | Brand: SparkFun

This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, ...

SKU: DF-DFR0767-2 | Brand: DFRobot

This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using ...

SKU: DF-DFR0767-3 | Brand: DFRobot

This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around t...

SKU: DF-DFR0767-4 | Brand: DFRobot

Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two f...

SKU: DF-DFR0767-1 | Brand: DFRobot

This pack combines a Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, giving you a compact platform for building a Raspberry Pi CM4-based router, gateway or IoT hub.The carrier b...

SKU: DF-SEN0705 | Brand: DFRobot

This flexible tactile pressure sensor gives your project a compact 4 x 8 pressure matrix for mapping contact across a small surface. It integrates 32 independent sensing points in a 20 x 10mm active area, making it us...

SKU: DF-SEN0651 | Brand: DFRobot

This compact AI camera module brings on-board vision inferencing to Raspberry Pi projects using the Sony IMX500 Intelligent Vision Sensor. It combines a 12.3-megapixel CMOS image sensor with integrated AI processing, ...

SKU: DF-SEN0671 | Brand: DFRobot

Instead of measuring just one dot, the TF-NOVA projects a wide 14° by 1° curtain of laser light to create a continuous line of detection. At 1 metre, that line covers 25cm x 1.7cm, helping automated machines spot thin...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...