Raspberry Pi

SKU: SF-PRT-14017 | Brand: SparkFun

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can en...

SKU: AF-2881 | Brand: Adafruit

An A/V RCA cable designed for the Raspberry Pi 3, 2, A+ and B+. Connect the 3.5 mm TRRS jack to your Pi and the RCA plugs to any composite video and stereo audio display or TV. Key Features Correct TRRS Wiring – Pi...

SKU: AF-3084 | Brand: Adafruit

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry ...

SKU: AF-3346 | Brand: Adafruit

The Adafruit I2S 3W Stereo Speaker Bonnet adds high-quality digital audio output to any Raspberry Pi with a 2×20 GPIO header. Using the I2S digital sound standard, audio data goes directly to the onboard Class D ampli...

SKU: AF-3508 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your Raspberry Pi Zero but was still sm...

SKU: AF-3561 | Brand: Adafruit

If you're looking to make a custom cable with any two of our HDMI adapters, then you'll need to have these flex cables handy! Making custom HDMI cables has never been easier. Just grab one of these cables...

SKU: AF-3386 | Brand: Adafruit

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...

SKU: PI-CAM001 | Brand: Pimoroni

A clip-on lens kit with three interchangeable lenses — wide-angle, fish-eye, and macro — for use with Raspberry Pi camera modules, phones, and other small cameras. Each lens screws into the included clip, which attach...

SKU: LB-LS7008-G | Brand: Little Bird

Bring the drama of game shows, the hype of hackathons, or the focus of “emergency stop” buttons right to your desktop! The Big Game Button is your project’s new MVP — a monster 100mm green button in a tough plastic sh...

SKU: WS-31295 | Brand: Waveshare

Product Description: Unleash your creative potential with the cutting-edge RP2350 1.8inch AMOLED Touch Display Development Board—a versatile and powerful tool for all your development needs. With its rich display and ...

SKU: WS-29318 | Brand: Waveshare

A 3.5" IPS display module with 320×480 resolution, 262K colours, and a 2-point capacitive touchscreen. The ST7796S display driver communicates over SPI while the FT6336U touch controller uses I2C, keeping wiring simpl...

SKU: AF-6056 | Brand: Adafruit

A snap-on silicone cover that protects the base and edges of your Raspberry Pi 5 from scratches, bumps, and surface contact. Lightweight and flexible, it adds a layer of protection without adding bulk or blocking acce...

SKU: PI-PIM715 | Brand: Pimoroni

An expanded 2.8" (320 x 240 pixel) IPS LCD display add on for Raspberry Pi Pico / Pico W, with four buttons, an RGB LED and Qw/ST connectivity.Pico Display 2.8" features a bold, credit-card sized 320 x 240 pixel LCD d...

SKU: WS-26379 | Brand: Waveshare

Introducing the PICO-CAM-A: RP2040 Camera Development Board Unlock the potential of image information capture with our PICO-CAM-A, a cost-effective, high-performance MCU camera board based on the Raspberry Pi RP2...

SKU: AF-5200 | Brand: Adafruit

The Adafruit PiCowbell Proto is a prototyping add-on board for the Raspberry Pi Pico and Pico W. It matches the Pico's footprint and sockets underneath, giving you a reset button, a STEMMA QT / Qwiic I2C connector, an...

SKU: WS-25509 | Brand: Waveshare

The Waveshare Pico-DVI-LCD is a 7" IPS display module designed for the Raspberry Pi Pico. Featuring 1024×600 resolution and a 170° viewing angle, it connects via DVI interface for high-speed communication and includes...

SKU: WS-25553 | Brand: Waveshare

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, ma...

SKU: WS-24783 | Brand: Waveshare

This 4.3" QLED display from Waveshare connects to Raspberry Pi via the DSI interface, providing a high-quality touchscreen with a single ribbon cable connection. The QLED (Quantum Dot LED) panel delivers a wider colou...

SKU: EF-EF08278 | Brand: ElecFreaks

Raspberry Pi Pico Starter Kit is an electronic starter kit that is designed for Raspberry Pico. The kit provides some basic electronic components such as LEDs, buttons, and photo-diode, it helps you enter a wonderful ...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...