Raspberry Pi

SKU: WS-25567 | Brand: Waveshare

The UPS HAT (D) is a powerful uninterruptible power supply designed for Raspberry Pi, offering seamless charging and power output with dynamic path management. This HAT provides stable 5V output, ensuring uninterrupte...

SKU: DF-DFR0876 | Brand: DFRobot

The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a se...

SKU: LB-LS3938 | Brand: Little Bird

This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi...

SKU: DF-DFR0918 | Brand: DFRobot

This terminal block expansion hat for Raspberry Pi offers securely and stably fitted connections for your projects. All GPIO pins are broken out to terminal blocks. The terminal block is labeled with high-quality colo...

SKU: AF-5705 | Brand: Adafruit

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member...

SKU: DF-DFR0940 | Brand: DFRobot

This power filter board for Raspberry Pi integrates solid capacitors, ceramic capacitors, and tantalum capacitors in a parallel hybrid filtering configuration. It filters low, mid, and high-frequency power noise from ...

SKU: WS-17912 | Brand: Waveshare

Add reliable, isolated CAN bus communication to your Raspberry Pi with this dual-channel expansion HAT. Built around the MCP2515 CAN controller and SN65HVD230 transceiver, it provides two fully independent CAN channel...

SKU: DF-DFR0824 | Brand: DFRobot

A dual-channel RS485 expansion HAT for Raspberry Pi that provides electrically isolated RS485 communication with built-in protection against lightning, surges, and transient voltage spikes. Each channel uses an isolat...

SKU: PL-5033 | Brand: Pololu

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Mo...

SKU: SF-WRL-19956 | Brand: SparkFun

The ALFA Network AHPI7292S is the world's first WiFi HaLow (802.11ah) HAT for Raspberry Pi. Similar to LoRa, WiFi HaLow operates in the sub-gigahertz 915MHz band, providing long-range, low-power wireless communication...

SKU: DF-FIT0731 | Brand: DFRobot

NOTE: This product compatible with Raspberry Pi 3 Model B+, Raspberry Pi 4 Model B, and Jetson Nano.              Not compatible with Raspberry Pi 400, Raspberry Pi Pico and Raspber...

SKU: DF-DRI0054 | Brand: DFRobot

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, st...

SKU: PL-5049 | Brand: Pololu

The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are ...

SKU: KI-5038 | Brand: Kitronik

The Kitronik Air Quality Control HAT for Raspberry Pi lets you monitor, log, and react to environmental data using the BME688 sensor. It measures temperature, pressure, humidity, air quality index, and eCO2, with an o...

SKU: WS-30717 | Brand: Waveshare

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite nav...

SKU: PL-5035 | Brand: Pololu

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Mo...

SKU: WS-21705 | Brand: Waveshare

A 5G cellular HAT for Raspberry Pi featuring the Quectel RM500U-CN module with quad antenna support. This board brings high-speed 5G, 4G LTE-A, and 3G connectivity to your Raspberry Pi, Jetson Nano, or PC — supporting...

SKU: AF-6449 | Brand: Adafruit

Add reliable real-time clock and programmable power control to a Raspberry Pi with this HAT+ add-on board. Witty Pi 5 can define your Raspberry Pi’s on/off sequence, trigger power actions based on temperature or volta...

SKU: AF-5704 | Brand: Adafruit

The Witty Pi 4 is a Raspberry Pi HAT that adds a precision real-time clock, power management, and scheduling capabilities. Define ON/OFF sequences to significantly reduce energy usage in battery-powered systems, or us...

SKU: SF-GPS-28929 | Brand: SparkFun

Achieve robust, centimetre-level RTK positioning in challenging RF environments with the SparkFun LG290P GNSS Flex pHAT. This all-in-one development board combines a versatile pHAT carrier with the powerful Quectel LG...