Raspberry Pi

SKU: AF-5705 | Brand: Adafruit

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member...

SKU: WS-17391 | Brand: Waveshare

The Waveshare 13.3″ Magic Mirror is a smart mirror display powered by a built-in Raspberry Pi 3A+. Behind a one-way mirror panel, a 13.3″ IPS touchscreen (1920×1080) displays customisable information — news, weather, ...

SKU: DF-FIT0604 | Brand: DFRobot

A transparent ABS case designed for the Raspberry Pi Zero and Zero W. The case features large cutouts for the GPIO header and camera port, keeping all connections accessible while protecting the board. The GPIO 40-pin...

SKU: AF-5090 | Brand: Adafruit

A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amp...

SKU: EC-CRF01056W | Brand: Elecrow

This is a Serial to USB adapter for NRF24L01+ Module. It can apply in Wireless remote control, data transmission, Wireless meter reading system, Wireless detection system, Wireless Data Acquisition System, VOIP system...

SKU: LB-24-2-LED | Brand: Little Bird

Check out our tutorial here There are three pins:Signal: This pin is a signal pin, and can be used to emit a green lightMiddle Pin : This pin is another signal pin, and can be used to emit a red lightGND: Though it ...

SKU: LB-24-REED | Brand: Little Bird

A reed switch is an electrical switch which is operated when a magnetic field is brought near to it.  Check out our tutorial here Digital Output (DO)GND: In electronics, we define a point in a circuit to be a ki...

SKU: DF-DFR0591 | Brand: DFRobot

This Raspberry Pi e-ink display module comes with a 2.13” screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It leads out the pins on Raspberry Pi, so there would be no co...

SKU: AF-4280 | Brand: Adafruit

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are nee...

SKU: PR-PIM058 | Brand: Little Bird

The Skywriter HAT uses electrical near-field 3D sensing to detect hand gestures and track position in three dimensions above the board. Powered by the Microchip MGC3130 sensor on a 4-layer PCB, it provides full X, Y, ...

SKU: EC-RPA08067R | Brand: Elecrow

Yes, this is an adorable small HDMI television with incredibly high resolution! We tried to get the smallest possible HDMI display with high-res, high-contrast visibility. The display is very easy to use - simply c...

SKU: EC-SES14002K | Brand: Elecrow

CrowPi is an educational tool based on Raspberry Pi, designed to help people learn electronics, programming, and basic computer science. CrowPi was first released on Kickstarter in May 2018 and won a very successful c...

SKU: PI-COM0002 | Brand: Pimoroni

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving...

SKU: AF-2222 | Brand: Adafruit

Connect your own PCB to a Raspberry Pi B+ with this normal-height female header.  The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3m...

SKU: AF-2187 | Brand: Adafruit

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Rasp...

SKU: SF-COM-08636 | Brand: SparkFun

The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...

SKU: AF-3203 | Brand: Adafruit

The Adafruit Perma-Proto Bonnet Mini Kit is a prototyping daughter board sized for the Raspberry Pi Zero. It plugs directly onto the Pi's 2×20 GPIO header and provides a grid of 0.1″ soldering holes connected in a fam...

SKU: RP-SC0759 | Brand: Raspberry Pi Ltd

Show your Raspberry Pi enthusiasm with this official ballpoint pen featuring the iconic Raspberry Pi logo. With a smooth click-action mechanism and black ink, it's a practical everyday pen that doubles as a conversati...

SKU: EC-SER14003P1 | Brand: Elecrow

The CrowPi 3 is an all-in-one portable programming lab with 41 built-in sensors and modules, a 4.3-inch touchscreen, and support for multiple development boards. Compatible with Raspberry Pi 5, micro:bit, Raspberry Pi...

SKU: LB-L-TRIP | Brand: Little Bird

Learn electronics, coding, and sensor systems with light! Step into the world of electronics with the Little Bird Laser Trip Wire Kit — a fun, hands-on STEM activity that brings together light, sensors, and sound. Hou...