Raspberry Pi Pico Cables and Connectors

When 0.1" is too big, and JST PH's too chunky, these ultra-slim 1.25mm connectors are a reliable alternative. These are only 1.25mm pitch, but have...

As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're sti...

The AMT-17C cable has a JAE FI-W17S connector for hookup. With a 17 pin connector type and 28AWG this cable comes in at 36" giving you plenty of ro...

Power your Pi with a wide range of input voltages from 3 to 16V!If you need a longer power cable to go with your Wide Input SHIM this is the produc...

We've finally found the best PCL filament in Australia! This is a 500g reel of 1.75mm PCL (Polycaprolactone) plastic filament for 3D printing.PCL m...

This is a simple two wire cable. Great for jumping from board to board or just about anything else.There is a 2-pin JST connector on one end, bare ...

Make your next custom USB cable a breeze with a USB Mini B Female Socket to 5-pin Terminal Block. If you need to connect to a device with ...

This is a 5 wire cable with a SHR style (1mm pitch) connector on each end. These are very similar to our Qwiic connectors and cables but are 5-pin....

These 6-wire cables are 162mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching...

This cable is especially designed for Interface shield, LED RGB Module. It is has a female 2x5 IDC connector on each end that is designed to pl...

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. ...

This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header o...

Cables for your Raspberry Pi camera module!