Raspberry Pi Heat Sinks and Cooling Fans

SKU: WS-26415 | Brand: Waveshare

This aluminium heatsink is designed specifically for the Raspberry Pi 5, aligning with its board dimensions and mounting holes for a precise fit. Made from lightweight aluminium with good thermal conductivity, it draw...

SKU: WS-21176 | Brand: Waveshare

A premium aluminium enclosure for the Raspberry Pi 4, featuring a stripe-grooved design on both top and bottom halves that enlarges the heat dissipation area for effective passive cooling. Built-in heatsink pillars ma...

SKU: AF-3082 | Brand: Adafruit

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat ...

SKU: DF-FIT0651 | Brand: DFRobot

Are you still bothered by the Raspberry Pi fever problem? Don’t worry, we have prepared a cooling solution for the Raspberry Pi 4B. Aluminum heat sink is adopted due to its highly cooling feature and excellent resi...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: AF-1467 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: DF-FIT0788-V2 | Brand: DFRobot

##Introduction This is an Aluminum case and heat sink kit built specifically for the Raspberry Pi CM4 IoT Router Carrier Board Mini. The kit allows the Raspberry Pi CM4 IoT Router Carrier Board Mini to be safely house...

SKU: SF-PRT-25761 | Brand: SparkFun

A compact aluminium heatsink with self-adhesive backing for easy peel-and-stick installation. Efficiently draws heat away from electronic components including ICs, voltage regulators, and processor chips to promote op...

SKU: AF-4341 | Brand: Adafruit

A premium anodised aluminium enclosure for the Raspberry Pi 4 with completely silent passive cooling. The solid aluminium body acts as a heatsink for the main processor, keeping the Pi cool without any fans or moving ...

SKU: SF-PRT-15773 | Brand: SparkFun

A black anodised aluminium heatsink case for the Raspberry Pi 4 that provides 10–15°C of passive cooling under full CPU load. The entire case acts as a heatsink, delivering completely silent cooling — ideal for home m...

SKU: DF-FIT0223 | Brand: DFRobot

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. T...

SKU: AF-6308 | Brand: Adafruit

Perfect for a variety of small projects, these adhesive squares provide a strong bond to most surfaces and are an excellent way to attach heat sinks to a chip.Each tab is 0.5" (12.7mm) square and 1.25mm thick. You get...

SKU: DF-FIT1015 | Brand: DFRobot

Introduction The Raspberry Pi Cooler for the Compute Module 5 is a passive heatsink designed to enhance heat dissipation, improving CPU performance while also protecting the module from mechanical damage. A layer of t...

SKU: AF-4822 | Brand: Adafruit

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum,...