Raspberry Pi Heat Sinks and Cooling Fans

SKU: WS-26399 | Brand: Waveshare

Introducing the POE HAT for Raspberry Pi 5: Simplify Connectivity and Power!High Power, Onboard Cooling Fan, With Metal Heatsink, Supports 802.3af/at network standard Power Over Ethernet (PoE) HAT designed for Rasp...

SKU: WS-26415 | Brand: Waveshare

This aluminium heatsink is designed specifically for the Raspberry Pi 5, aligning with its board dimensions and mounting holes for a precise fit. Made from lightweight aluminium with good thermal conductivity, it draw...

SKU: LB-PT22033-R | Brand: Little Bird

Passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heatsink design on top and passively cools the Pi using embedded so...

SKU: PH-105820 | Brand: PiHut

The FLIRC case for the Raspberry Pi 5 combines a sleek aluminium top with an ABS plastic base for effective passive cooling and a premium look. The included ARCTIC thermal pad transfers heat from the CPU to the alumin...

SKU: AF-3082 | Brand: Adafruit

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat ...

SKU: DF-FIT0651 | Brand: DFRobot

Are you still bothered by the Raspberry Pi fever problem? Don’t worry, we have prepared a cooling solution for the Raspberry Pi 4B. Aluminum heat sink is adopted due to its highly cooling feature and excellent resi...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: AF-1515 | Brand: Adafruit

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: DF-FIT0788-V2 | Brand: DFRobot

##Introduction This is an Aluminum case and heat sink kit built specifically for the Raspberry Pi CM4 IoT Router Carrier Board Mini. The kit allows the Raspberry Pi CM4 IoT Router Carrier Board Mini to be safely house...

SKU: SF-PRT-25761 | Brand: SparkFun

A compact aluminium heatsink with self-adhesive backing for easy peel-and-stick installation. Efficiently draws heat away from electronic components including ICs, voltage regulators, and processor chips to promote op...

SKU: SF-PRT-15773 | Brand: SparkFun

A black anodised aluminium heatsink case for the Raspberry Pi 4 that provides 10–15°C of passive cooling under full CPU load. The entire case acts as a heatsink, delivering completely silent cooling — ideal for home m...

SKU: DF-FIT0223 | Brand: DFRobot

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. T...

SKU: DF-FIT1015 | Brand: DFRobot

Introduction The Raspberry Pi Cooler for the Compute Module 5 is a passive heatsink designed to enhance heat dissipation, improving CPU performance while also protecting the module from mechanical damage. A layer of t...

SKU: LB-PT22033-S | Brand: Little Bird

Passive cooling aluminum case for Raspberry Pi Zero W and Raspberry Pi Zero 2W boards! This beautiful black anodized aluminum case features a heatsink design on top and passively cools the Pi using embedded so...

SKU: DF-FIT0542 | Brand: DFRobot

This is a heatsink pack for Raspberry Pi. It contains 3 different heatsink which respectively correspond 3 different chips. It is a perfect solution for cooling the operating temperature when the Raspberry Pi are deal...

SKU: AF-3084 | Brand: Adafruit

Looking for an ultra-thin heat sink for your Raspberry Pi 3? Check out this nice and slim 13x13x3mm Heat Sink! This heat sink is made from high quality aluminum and will work perfectly with any Raspberry ...

SKU: PH-105875 | Brand: PiHut

If your Raspberry Pi 5 project has to fit into a tight spot, or you just aren't into the huge tower cooler thing, this ultra low-profile heatsink might be just what you need to aid your running temperatures.Sitting cl...

SKU: DF-FIT0367 | Brand: DFRobot

This high quality, low profile, pure copper heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, SOCs or a  LattePanda. The pure copper increases heat d...

SKU: PI-COM1202 | Brand: Pimoroni

The Raspberry Pi 3 is undoubtedly cool, but if your project is particularly resource-hungry then it may run a little hot. Cool it down with this nifty little heatsink!Simply remove the backing from the pre-a...