Raspberry Pi Accessories

SKU: AF-5930 | Brand: Adafruit

A PCIe flex cable (PCIe Pipe) for connecting the Pimoroni NVMe Base to a Raspberry Pi 5. The cable features a keyed design with 16 pads at the Raspberry Pi 5 end and 18 pins at the NVMe Base end, preventing incorrect ...

SKU: WS-25288 | Brand: Waveshare

Long-wave IR Thermal Imaging Camera Module, 80×62 Pixels, 45°FOV, Available with 40PIN GPIO Header or Type-C PortLong-wave IR Thermal Imaging Camera Module 80×62 Pixels IR Array  Small Size | Non-c...

SKU: DF-DFR0824 | Brand: DFRobot

A dual-channel RS485 expansion HAT for Raspberry Pi that provides electrically isolated RS485 communication with built-in protection against lightning, surges, and transient voltage spikes. Each channel uses an isolat...

SKU: AF-5612 | Brand: Adafruit

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your...

SKU: DF-DFR0828 | Brand: DFRobot

When making Raspberry Pi projects or learning to use Raspberry Pi for python programming, we may often need to check its Pinout Table to find out the BCM and WiringPi code corresponding to the related GPIOs, which is ...

SKU: DF-FIT0829 | Brand: DFRobot

The 6mm Industrial Wide Angle Lens is a 3-megapixel CS-mount lens with a 63° field of view, designed for use with the Raspberry Pi High-Quality Camera and Jetson Nano 12.3MP camera. Its wide angle and adjustable focus...

SKU: DF-DFR0913 | Brand: DFRobot

This DFRobot 4-channel optocoupler-isolated level converter translates 12V signals down to 3.3V, making it easy to interface industrial sensors and PLC outputs with Arduino, Raspberry Pi, and other 3.3V microcontrolle...

SKU: AF-5038 | Brand: Adafruit

Witty Pi 3 Mini adds a real-time clock (DS3231SN) and intelligent power management to your Raspberry Pi in a compact bonnet/pHAT form factor. It allows you to schedule startup and shutdown times, define complex ON/OFF...

SKU: AF-5293 | Brand: Adafruit

A soft grey felt sleeve case sized to fit the Raspberry Pi 400 and similarly sized compact keyboards. The wool-like felt fabric provides cushioning and scratch protection, while a strong elastic band keeps the case se...

SKU: AF-5294 | Brand: Adafruit

This 20-pin GPIO ribbon cable provides a clean, reliable connection between PCBs, development boards, and breakout headers. The soft, flexible 0.05″ ribbon cable with keyed IDC connectors on both ends ensures correct ...

SKU: DF-FIT0775 | Brand: DFRobot

Rack Tower stands for a new concept for the 4-layer acrylic case for the cluster.This 4-layer acrylic oversized fan enclosure is a new product designed to provide shell protection and cooling solutions for Raspbe...

SKU: AF-4728 | Brand: Adafruit

A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire bo...

SKU: AF-4553 | Brand: Adafruit

We dig the sleek lines and satisfying heft of this aluminum case. Handsomely designed and thoughtfully constructed with a built-in heat sink, this Flirc enclosure boasts both form and function. The sides are aluminum,...

SKU: AF-4395 | Brand: Adafruit

Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD Card Extender. This is a great hack for length constra...

SKU: AF-4506 | Brand: Adafruit

The Adafruit 1.3" Colour TFT Bonnet for Raspberry Pi combines a 240×240 IPS TFT display with a 5-way joystick and two pushbuttons on a single plug-and-play bonnet. The display is driven by the ST7789 controller over S...

SKU: AF-4112 | Brand: Adafruit

The Official Raspberry Pi Keyboard is a compact, full QWERTY keyboard with three built-in USB 2.0 ports for connecting additional peripherals. Designed by the Raspberry Pi Foundation, it features an ergonomic layout a...

SKU: AF-1434 | Brand: Adafruit

A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible wit...

SKU: SF-COM-15107 | Brand: SparkFun

For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data, and still dwarfs older memory systems like magnetic core memory.This card is...

SKU: AF-2029 | Brand: Adafruit

The Raspberry Pi B+/Pi 2/ Pi 3 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our ...

SKU: AF-2280 | Brand: Adafruit

The Adafruit Pi Box Plus is a crystal-clear acrylic enclosure designed specifically for the Raspberry Pi Model A+. Six laser-cut pieces slide together and secure with four screws for a sturdy, professional-looking bui...