Raspberry Pi Accessories

SKU: PI-COM1202 | Brand: Pimoroni

The Raspberry Pi 3 is undoubtedly cool, but if your project is particularly resource-hungry then it may run a little hot. Cool it down with this nifty little heatsink!Simply remove the backing from the pre-a...

SKU: AF-922 | Brand: Adafruit

Add a miniature wireless controller to your computer project with this combination keyboard and touchpad. We found the smallest wireless USB keyboard available, a mere 6" x 2.4" x 0.5" (152mm x 59mm x 12.5mm)! It's...

SKU: PR-PIM309 | Brand: Little Bird

This diffuser will give your pHAT lovely bokeh! Cut from the finest frosted perspex, this little diffusion layer will soften the lights from your Scroll pHAT HD, Unicorn pHAT, or any other pHAT with lovely, blinky ...

SKU: PR-PIM322 | Brand: Little Bird

A preposterous pile of peripherals on your Pi! Mix and match 3 HATs or 5 pHATs into a platter of functionality. Use pHAT Stack for specific setups and projects, or just as a handy way to use several HATs or pHATs a...

SKU: PR-PIM250 | Brand: Little Bird

Ideal for a mini CCTV system, this set of horizontal and vertical motion servos will give you Pi camera movement with a minimum of fuss. Pan-Tilt HAT lets you mount and control one of our pan-tilt modules right on ...

SKU: PR-PIM011 | Brand: Little Bird

The perfect mounting solution for your Raspberry Pi! Simply remove the protective backing from the OmniVESA and follow the instructions below to mount your Raspberry Pi either bare or in any of the most popular&nbs...

SKU: PR-PIM400 | Brand: Little Bird

A 128x64 pixel, 2.15" LCD display with snazzy six-zone RGB backlight and six capacitive touch buttons. GFX HAT makes an ideal display and interface for your headless Pi projects. GFX HAT riffs off our beloved Displ...

SKU: PR-PIM181 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring c...

SKU: PR-PIM301 | Brand: Little Bird

Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Our SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HAT...

SKU: TR-INITULTPI | Brand: 4tronix

  Ultimate Initio Kit for Raspberry Pi Does NOT include the Raspberry Pi Model B 3 Includes 4tronix RoboHAT No Soldering RequiredKit Contents: Main Initio chassis (with wheels, motors, gearboxes, ba...

SKU: AF-2232 | Brand: Adafruit

Its a mini panel-mountable HDMI monitor! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This backpack features the TFP401...

SKU: PL-2753 | Brand: Pololu

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors....

SKU: AF-2441 | Brand: Adafruit

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered spec...

SKU: SF-TOL-13831 | Brand: SparkFun

This is a high-quality switching ‘wall wart’ AC to DC 5.1V 2,500mA USB Micro-B wall power supply manufactured specifically for projects that require a higher level of power. This compact USB AC charger is UL and CS...

SKU: DF-DFR0413 | Brand: DFRobot

This 0.96″ 128×64 OLED Display Module is designed for Raspberry Pi projects where a compact, low-power screen is needed to show system information such as IP addresses, CPU temperature, and status messages. The SSD130...

SKU: PL-3753 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...

SKU: PH-100316 | Brand: PiHut

These handy rubber feet are great for sticking on the bottom of things, and we found that they act as a great base when stuck on the bottom of the Raspberry Pi - no more desk scratches or skating boards! The feet come...

SKU: PI-PIM757 | Brand: Pimoroni

Protect your Raspberry Pi Touch Display 2 with this tidy desktop display frame! 3 unique layers provide support and protection to the back of the screen 2 legs hold your screen at an ideal viewing angle - landscape or...

SKU: PI-PIM743 | Brand: Pimoroni

An all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strips.Plasma 2350 is powered and programmable by USB-C and, because USB-C is capable of drawing up to 3A of power, that's...

SKU: SF-SEN-21334 | Brand: SparkFun

This is the 25mm M-12 mount telephoto lens for use with the Raspberry Pi HQ Camera Module M-12. The lens produces a 5MP picture with a 18° field of view in a 1in image format and is easily interchangeable using the th...