Raspberry Pi Accessories

SKU: SB-21239 | Brand: Little Bird

A GPIO header extension adapter for the Raspberry Pi 400, providing a standard 2×20 pin GPIO header so you can connect HATs, pHATs, and other add-on boards. Since the Pi 400's GPIO header is recessed at the back of th...

SKU: DF-FIT0672 | Brand: DFRobot

A 30cm flat flex cable (FFC) extension for Raspberry Pi camera modules. The 15-pin ribbon cable connects between the Raspberry Pi's CSI port and the camera module, extending the reach for remote mounting or enclosure ...

SKU: WS-20330 | Brand: Waveshare

RP2040-LCD-0.96 is a low-cost, high-performance Pico-like MCU board with flexible digital interfaces. It incorporates Raspberry Pi's RP2040 microcontroller chip, as same as the one on Raspberry Pi Pico. For softwa...

SKU: AF-4901 | Brand: Adafruit

The Adafruit GPIO Reference Card for Raspberry Pi Pico is a pocket-sized, full-colour pinout diagram printed on durable card stock. It provides a quick visual guide to every pin on the Pico, clearly labelling power, P...

SKU: EC-DRA09012K | Brand: Elecrow

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapte...

SKU: ET-2113609 | Brand: Little Bird

Description: This 2M HDMI Cable is perfect to plugging you Raspberry Pi into your HDMI enabled monitor or television. Dimensions:   Connector Type A: HDMI Plug  Connector Type B: HDMI Plug  ...

SKU: AF-3662 | Brand: Adafruit

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need.  Absolutely no soldering required! All t...

SKU: AF-2324 | Brand: Adafruit

The Adafruit Ultimate GPS HAT adds high-quality GPS and GLONASS positioning to your Raspberry Pi. Built around a PA1616D module, it provides precise location data and a built-in real-time clock (RTC) with coin cell ba...

SKU: SF-PRT-14017 | Brand: SparkFun

This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights of your GPIO to accommodate for enclosures or other parts that can en...

SKU: AF-3386 | Brand: Adafruit

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...

SKU: PI-CAM001 | Brand: Pimoroni

A clip-on lens kit with three interchangeable lenses — wide-angle, fish-eye, and macro — for use with Raspberry Pi camera modules, phones, and other small cameras. Each lens screws into the included clip, which attach...

SKU: AF-6056 | Brand: Adafruit

A snap-on silicone cover that protects the base and edges of your Raspberry Pi 5 from scratches, bumps, and surface contact. Lightweight and flexible, it adds a layer of protection without adding bulk or blocking acce...

SKU: WS-25509 | Brand: Waveshare

The Waveshare Pico-DVI-LCD is a 7" IPS display module designed for the Raspberry Pi Pico. Featuring 1024×600 resolution and a 170° viewing angle, it connects via DVI interface for high-speed communication and includes...

SKU: WS-25553 | Brand: Waveshare

A 3 MP camera module built around the SmartSens SC3336 sensor, designed for use with LuckFox Pico series boards. The 1/2.8" CMOS sensor delivers high-sensitivity, high-SNR imaging with strong low-light performance, ma...

SKU: WS-24783 | Brand: Waveshare

This 4.3" QLED display from Waveshare connects to Raspberry Pi via the DSI interface, providing a high-quality touchscreen with a single ribbon cable connection. The QLED (Quantum Dot LED) panel delivers a wider colou...

SKU: AF-5721 | Brand: Adafruit

We've lost count of how many times we've tried to mount a camera module onto a panel or enclosure but struggled to drill the very small M2 holes right at the edge of the camera board, and don't even mention trying to ...

SKU: AF-5705 | Brand: Adafruit

Witty Pi is an add-on board that adds real time clock and power management to your Raspberry Pi. It can define your Raspberry Pi’s ON/OFF sequence and significantly reduce energy use. Witty Pi 4 L3V7 is the new member...

SKU: DF-FIT0604 | Brand: DFRobot

A transparent ABS case designed for the Raspberry Pi Zero and Zero W. The case features large cutouts for the GPIO header and camera port, keeping all connections accessible while protecting the board. The GPIO 40-pin...

SKU: DF-DFR0566 | Brand: DFRobot

An I/O expansion HAT for Raspberry Pi 4B and 3B+ that breaks out all GPIO pins into clearly labelled digital, analogue, PWM, I2C, UART, SPI, and I2S interfaces. The board is compatible with DFRobot Gravity series sens...

SKU: PI-COM0002 | Brand: Pimoroni

This 2×20 pin female GPIO header with extended 11 mm pins is designed for Raspberry Pi boards with 40-pin GPIO headers. The extra-tall pins are perfect for stacking pHAT boards on top of each other while still leaving...