NFC & RFID Sensors

SKU: EC-WRN13564N | Brand: Elecrow

This is a MiFare Classic card - often used for electronic locks or customer identification. The tag contains an NXP S50 chip and an antenna and is passively powered by the reader/writer when placed a couple of inches ...

SKU: EC-WRN13569N | Brand: Elecrow

This is a MiFare Classic keychain fob - often used for electronic locks or customer identification. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple in...

SKU: EC-ACS53201S | Brand: Elecrow

NFC(Near Field Communication) is a set of standards for smartphones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity , it builds upon...

SKU: AF-4033 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC white tag contains an NTAG203 chip with 144 bytes of writable EEPROM storage. The compact white disc form factor is commonly used for laundry tracking, garment identification, and general...

SKU: DF-FIT0321 | Brand: DFRobot

As a fan of Near Field Communications(NFC), a set of short-range wireless technologies, typically requiring a distance of 10cm or less, for two devices such as smartphones or the similar things very close to each oth...

SKU: AF-361 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC clear tag is a compact disc-shaped token commonly used for laundry tracking, garment identification, and asset tagging. The transparent housing makes the embedded antenna coil visible. Th...

SKU: SF-DEV-10406 | Brand: SparkFun

This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used as a shield for an Arduino. There is a small prototyping area as wel...

SKU: LB-LR0214-148A | Brand: Little Bird

This PN532-based NFC module is designed for near field communication projects in the 13.56MHz range, with a maximum communication distance of 30mm.The board includes its own antenna and can communicate via SPI, IIC (I...

SKU: SF-SEN-21274 | Brand: SparkFun

The SparkFun Qwiic Dynamic NFC/RFID Tag features the ST25DV64KC dynamic Near Frequency Communication (NFC) / Radio Frequency Identification (RFID) tag IC from STMicroelectronics©. The ST25DV64KC offers 64-kBit (8-kByt...

SKU: EF-EF03081 | Brand: ElecFreaks

The NFC/RFID breakout based on PN532, which is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and...

SKU: AF-4429 | Brand: Adafruit

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data...

SKU: AF-789 | Brand: Adafruit

The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phon...

SKU: AF-4043 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC silicone bracelet contains an NTAG203 chip with 144 bytes of writable EEPROM storage. It is passively powered — no battery is needed. Hold the bracelet a few centimetres from a compatible...

SKU: AF-359 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC card contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The standard credit-card-sized form factor (ISO 7810 ID-1) makes it suitable for access control badges, identi...