Motors (DC, stepper, servo)

SKU: AF-4699 | Brand: Adafruit

A simple DC-powered air pump for inflatables and air-powered projects. Power it with ~4.5V (5V works fine) and it draws about 500mA, making it easy to run from the same supply as your DC motors or servos. The pump suc...

SKU: SF-ROB-16836 | Brand: SparkFun

The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extens...

SKU: DF-FIT0632 | Brand: DFRobot

Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full po...

SKU: DF-FIT0633 | Brand: DFRobot

Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power...

SKU: DF-SER0047 | Brand: DFRobot

A 9g micro servo with 180° rotation, metal gears, and built-in analog feedback (0–3.3V). The analog feedback signal allows connection to an MCU for closed-loop position control, providing more precise operation than s...

SKU: EF-EF04059 | Brand: ElecFreaks

OCTOPUS Motor Brick is a type of simple electronic building blocks of the fan motor drive module, it can be used as simple Arduino teaching demo, convenient for  Arduino beginners to learn. Features: Power su...

SKU: SF-DEV-15316 | Brand: SparkFun

Control up to 16 servo motors from your Raspberry Pi over I2C with the SparkFun Servo pHAT. By using I2C for PWM generation, this HAT keeps all your GPIO pins free for other tasks. It also provides a serial terminal c...

SKU: SF-ROB-14760 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 p...

SKU: DF-DFR0513 | Brand: DFRobot

This motor driver module is a special PPM signal motor controller for Aero modelling remote control. It is designed by DFRobot and it can be controlled by RC transmitter. The driver can convert PPM signal to t...

SKU: AF-3864 | Brand: Adafruit

Need a great drive solution or a pop of color for your little robotic friends? This TT Motor Paddle Wheel Pack offers 3 fun, candy-colored wheels with a press-fit design to make connec...

SKU: AF-3843 | Brand: Adafruit

We couldn't let the DC Gearbox "TT" motors have all the fun! If you're using some sort of motor, there's a really good chance it's a low cost DC Motor in "130 Size". We stock these in the shop, they're the most bas...

SKU: AF-3837 | Brand: Adafruit

This machined aluminium servo arm is a durable, precision-made replacement for the plastic servo horns typically included with hobby servos. The anodised aluminium construction provides significantly more strength and...

SKU: AF-3782 | Brand: Adafruit

Simple snap-on encoder wheels for TT gearbox motors. These injection-moulded plastic discs attach to the opposite end of the motor shaft from your wheel, letting you measure rotation speed using a photo interrupter se...

SKU: AF-1142 | Brand: Adafruit

This high-torque standard servo now comes in a metal-gear flavor, for extra-high torque (10 kg*cm!) and reliability! It can rotate at least 120 degrees (60 in each direction) with a classic 1.5-2.5ms pulse, but if you...

SKU: AF-1176 | Brand: Adafruit

A machined aluminium flexible shaft coupler for connecting a 5mm shaft to an 8mm shaft. The spiral-cut design provides slight flexibility to accommodate minor misalignment between shafts, reducing binding without intr...

SKU: AF-1449 | Brand: Adafruit

A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enable...

SKU: DF-ROB0049 | Brand: DFRobot

The DFRobot MiniQ 2WD robotic platform is a compact, round chassis designed for students and hobbyists. At just 122 mm in diameter, it's ideal for indoor applications including maze competitions, educational courses, ...

SKU: DF-FIT0094 | Brand: DFRobot

The Micro Metal Gearmotor 50:1 is a compact, high-quality DC motor with an integrated metal gearbox, ideal for small robotics and motorised projects. With a 50:1 gear ratio, it delivers a good balance of speed (260 RP...

SKU: DF-ROB0143 | Brand: DFRobot

The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in c...

SKU: SF-ROB-09347 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-p...