Motor Drivers and Controllers

SKU: DF-DRI0009 | Brand: DFRobot

The DFRobot 2×2A DC Motor Shield uses the L298P dual full-bridge driver chip to control two DC motors at up to 2 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using PWM pins 5 and 6 for s...

SKU: PL-4035 | Brand: Pololu

This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 2.1 A (6 A peak) to a single bidirectional brushed DC motor. The DRV887...

SKU: MB-12040 | Brand: Makeblock

This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high effic...

SKU: AF-3928 | Brand: Adafruit

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixe...

SKU: DF-DFR0225 | Brand: DFRobot

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousand...

SKU: AF-2928 | Brand: Adafruit

The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...

SKU: DF-DFR0430 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecting it to the MCU and lear...

SKU: SF-COM-09479 | Brand: SparkFun

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a stagge...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: PL-4733 | Brand: Pololu

The MP6550 from Monolithic Power Systems (MPS) is an H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 1.8 V to 22 V. It can supply up to about 1.7 A continuously and featu...

SKU: PL-5033 | Brand: Pololu

The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Mo...

SKU: IT-IM120417005 | Brand: Little Bird

Overview MotoMama is a Arduino shield based on L298N H-bridge driver chip. You can use this shield to drive two DC motors or an four-wire two-phase stepper motor.  For power supply , power terminal on board is...

SKU: DF-DRI0002 | Brand: DFRobot

A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high...

SKU: DF-DRI0001 | Brand: DFRobot

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for mot...

SKU: DF-DFR1216 | Brand: DFRobot

##Introduction The Multi-function Expansion Board for UNIHIKER is an all-in-one solution designed to unlock the full potential of UNIHIKER K10 projects. It directly addresses common hurdles by integrating a powerful m...

SKU: WS-30461 | Brand: Waveshare

The Waveshare Modbus RTU 4-Channel Relay Module provides reliable high-current switching for industrial automation over an RS485 bus. Each of the four SPDT relays handles loads up to 30A at 250VAC or 28VDC, making it ...

SKU: PR-PIM688 | Brand: Little Bird

A high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices. The Do-Everything Board 🦾 Yukon is a standalone controller that can...

SKU: PR-PIM672 | Brand: Little Bird

Introducing the Inventor HAT Mini, a versatile motor, servo, and audio driver add-on board designed for Raspberry Pi enthusiasts. With this compact HAT, you can bring your mechanical inventions, creations, and cont...

SKU: PL-5049 | Brand: Pololu

The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are ...