Motor Drivers and Controllers

SKU: LB-OWL-HBRIDGE | Brand: Little Bird

Using the powerful L298N Dual Motor Driver，this module allows full control of two DC Motors or one stepper-motor. Screw Terminals for easy connections；LEDs show power and output status. Requires six digital inputs....

SKU: WS-15423 | Brand: Waveshare

The RPi Relay Board (B) is an 8-channel relay expansion board for Raspberry Pi, giving your Pi the ability to switch high-voltage loads such as home appliances, lighting, motors, and other AC/DC devices. Each relay ha...

SKU: EF-EF03406 | Brand: ElecFreaks

Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with maximun 1.2A DC single channel current. It has also integrated 12 GVS por...

SKU: WS-19767 | Brand: Waveshare

Servo Driver Module For Pico Ideal For Controlling Robotic Arm Or Hexapod Walker Features At A Glance Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Up to 16-Channel servo/PWM outpu...

SKU: PH-103393 | Brand: PiHut

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak)...

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...

SKU: LB-LR0309-57 | Brand: Little Bird

The servo tester and controller can be used as a signal generator for electronic speed controllers.   If you are looking for a low-cost way to get a servo up and running without any programming, you can plug d...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: LB-LS1773-12V | Brand: Little Bird

An 8-channel 12V relay module with USB-A interface for computer-based control. Uses the ULN2803 relay driver chip and genuine Songle relays for stable operation. Each relay is rated for 10A switching. Features both a...

SKU: AF-815 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from you...

SKU: KS-KS4033 | Brand: Keyestudio

The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwi...

SKU: AF-3416 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...

SKU: LB-LR0180 | Brand: Little Bird

Including CNC Shield V3.0The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers.It has in total 4 channel slots for A4988 stepper motor driver modules for d...

SKU: DF-DRI0043 | Brand: DFRobot

The TB6600 is a professional stepper motor driver for two-phase stepping motors, compatible with Arduino and other microcontrollers that output 5V digital pulse signals. With a wide 9–42VDC power input and up to 4A pe...

SKU: AF-807 | Brand: Adafruit

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally ...

SKU: DF-DFR0144 | Brand: DFRobot

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each ...

SKU: WS-24964 | Brand: Waveshare

An industrial-grade 8-channel relay module controlled via Ethernet, supporting Modbus RTU and Modbus TCP protocols. Features PoE power supply (IEEE 802.3af), optocoupler isolation, reverse-polarity protection, and a r...

SKU: LB-LR0149 | Brand: Little Bird

The EasyDriver is a simple stepper motor driver board based on the Allegro A3967 IC. It accepts a digital step/direction input (3.3 V or 5 V logic) and drives bi-polar stepper motors (4, 6, or 8 wire) at any voltage w...

SKU: AF-2305 | Brand: Adafruit

The Adafruit DRV2605L Haptic Motor Controller is a dedicated driver for haptic feedback motors, controlled via I2C. Rather than simple on/off control, the TI DRV2605L chip offers a library of over 100 built-in vibrati...