Motor Drivers and Controllers

SKU: LB-OWL-HBRIDGE | Brand: Little Bird

Using the powerful L298N Dual Motor Driver，this module allows full control of two DC Motors or one stepper-motor. Screw Terminals for easy connections；LEDs show power and output status. Requires six digital inputs....

SKU: WS-15423 | Brand: Waveshare

The RPi Relay Board (B) is an 8-channel relay expansion board for Raspberry Pi, giving your Pi the ability to switch high-voltage loads such as home appliances, lighting, motors, and other AC/DC devices. Each relay ha...

SKU: EF-EF03406 | Brand: ElecFreaks

Motor:bit is a motor driving board based on micro:bit. It has integrated a TB6612 motor driving chip, which is used to drive two motors with maximun 1.2A DC single channel current. It has also integrated 12 GVS por...

SKU: WS-19767 | Brand: Waveshare

Servo Driver Module For Pico Ideal For Controlling Robotic Arm Or Hexapod Walker Features At A Glance Standard Raspberry Pi Pico header, supports Raspberry Pi Pico series boards Up to 16-Channel servo/PWM outpu...

SKU: AF-2348 | Brand: Adafruit

The Adafruit DC & Stepper Motor HAT drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are needed...

SKU: EC-MCS02930M | Brand: Elecrow

This Adruino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motor or two 4-wire stepper and two 5v servo. It drive the DC motor and stepper with the L293D,and it drive ...

SKU: AF-3297 | Brand: Adafruit

The Adafruit DRV8833 is a dual H-bridge motor driver breakout, capable of driving two DC motors bidirectionally or one bipolar/unipolar stepper motor at up to 1.2 A per channel. It's well suited for low-voltage applic...

SKU: AF-815 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Driver uses the PCA9685 chip to provide 16 channels of 12-bit PWM output over I2C. With a built-in clock, the driver runs independently — no need to continuously send signals from you...

SKU: KS-KS4033 | Brand: Keyestudio

The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwi...

SKU: AF-3416 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...

SKU: DF-DRI0043 | Brand: DFRobot

The TB6600 is a professional stepper motor driver for two-phase stepping motors, compatible with Arduino and other microcontrollers that output 5V digital pulse signals. With a wide 9–42VDC power input and up to 4A pe...

SKU: AF-807 | Brand: Adafruit

Run four solenoids, two DC motors or one bi-polar or uni-polar stepper with up to 600mA per channel using the L293D. These are perhaps better known as "the drivers in our Adafruit Motorshield". If you accidentally ...

SKU: DF-DFR0144 | Brand: DFRobot

This 4-channel relay shield from DFRobot plugs directly onto an Arduino Uno or compatible board, providing opto-isolated relay switching for controlling high-power devices such as lamps, water pumps, and motors. Each ...

SKU: WS-24964 | Brand: Waveshare

An industrial-grade 8-channel relay module controlled via Ethernet, supporting Modbus RTU and Modbus TCP protocols. Features PoE power supply (IEEE 802.3af), optocoupler isolation, reverse-polarity protection, and a r...

SKU: AF-2305 | Brand: Adafruit

The Adafruit DRV2605L Haptic Motor Controller is a dedicated driver for haptic feedback motors, controlled via I2C. Rather than simple on/off control, the TI DRV2605L chip offers a library of over 100 built-in vibrati...

SKU: DF-DFR0429 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecti...

SKU: LB-LR0051 | Brand: Little Bird

A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, an...

SKU: WS-25514 | Brand: Waveshare

The Bus Servo Adapter (A) is a compact driver board that integrates power supply and control circuitry for ST/SC series serial bus servos. It supports controlling up to 253 servos simultaneously over a single UART cha...

SKU: EC-CDP03051C | Brand: Elecrow

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper mo...

SKU: DF-DFR0502 | Brand: DFRobot

Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and...