Motor Drivers and Controllers

SKU: LB-LR0051 | Brand: Little Bird

A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, an...

SKU: DF-DFR0305 | Brand: DFRobot

The Romeo BLE is an all-in-one Arduino-compatible robot control board from DFRobot with integrated Bluetooth 4.0. It combines an ATmega328P microcontroller, a dual-channel DC motor driver (2 A max), and a TI CC2540 BL...

SKU: DF-DFR0351 | Brand: DFRobot

INTRODUCTION Romeo BLE mini is a small Arduino compatible robot control board with motor driver and bluetooth 4.0. It benefits from the Arduino open source platform, which includes thousa...

SKU: MB-12040 | Brand: Makeblock

This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high effic...

SKU: DF-DFR0225 | Brand: DFRobot

RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousand...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: AF-6109 | Brand: Adafruit

The Adafruit A4988 Stepper Motor Driver Breakout simplifies stepper motor control down to just two pins — a direction pin and a step pin. Each pulse on the step pin advances the motor by one step or microstep, making ...

SKU: DF-DFR0994 | Brand: DFRobot

Romeo ESP32-S3 is a high-performance development board specifically designed forrobotics projects. It utilizes the ESP32-S3 microcontroller and is equipped with an onboard camera that enables video transmission and...

SKU: DF-DRI0054 | Brand: DFRobot

##Introduction The multifunctional motor driver expansion board is designed for Raspberry Pi Zero/Zero W/A+/B+/2B/3B/3B+/4B. This fully-featured robot motor expansion board is capable of supporting multiple motors, st...

SKU: KI-5612 | Brand: Kitronik

Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can...

SKU: AF-6353 | Brand: Adafruit

The Adafruit STSPIN220 Stepper Motor Driver Breakout makes controlling bipolar stepper motors simple with a GPIO-only interface — just two pins (DIR and STEP) are all you need. It defaults to 1/16 microstepping and su...

SKU: DF-DFR1063 | Brand: DFRobot

The Romeo Mini ESP32-C3 is a compact robot control board with an onboard ESP32-C3 module providing Wi-Fi and Bluetooth 5 dual-mode communication. It features two channels of 1.7A motor drivers, servo control, and 9 Gr...

SKU: DF-DFR1136 | Brand: DFRobot

This DFRobot motor driver carrier board is purpose-built for the UNIHIKER M10, featuring a tilted edge connector slot that positions the screen at an optimal viewing angle. It integrates a dual 3 A DC motor driver wit...

SKU: SF-DEV-14285 | Brand: SparkFun

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...

SKU: SF-KIT-14180 | Brand: SparkFun

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto ...

SKU: DF-DRI0056 | Brand: DFRobot

This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports L...

SKU: EC-AK55865RF | Brand: Elecrow

The Leaper Upgraded Learning Kit is a comprehensive Arduino starter kit that includes advanced modules such as an RFID reader, stepper motor driver, real-time clock, and a wide range of sensors and components. Built a...

SKU: EF-EF03009 | Brand: ElecFreaks

An 8-channel relay module operating at 5V, compatible with Arduino, Raspberry Pi, and other MCU boards (PIC, ARM, MSP430). Each relay channel has an LED indicator showing its output state, making it easy to monitor wh...

SKU: SS-108020021 | Brand: Seeed Studio

Features Easy to use Cartoon Style mini fan Soft fan-blade to avoid injuries Built-in programmable microcontroller that uses Arduino IDE You can change the code to drive servo motors instead of DC motor Description...

SKU: PR-PIM175 | Brand: Little Bird

The Explorer HAT Pro is a feature-packed add-on board for Raspberry Pi that brings together digital I/O, analog inputs, capacitive touch, motor drivers, LEDs, and a mini breadboard — all on a single HAT. It's ideal fo...