Micro:bit Sensors and Modules

SKU: EF-EF05022 | Brand: ElecFreaks

ELECFREAKS PlanetX BME280 Environment Sensor is a combination sensor based on digital humidity, pressure, and temperature sensors. It is also able to calculate the altitude based on the air pressure value.Learn Plane...

SKU: EF-EF05010 | Brand: ElecFreaks

A green LED module from the ELECFREAKS PlanetX sensor range, designed for use with micro:bit and the Nezha expansion board. The RJ11 connector makes it simple to plug in — no soldering or breadboard required. Control...

SKU: EF-EF05011 | Brand: ElecFreaks

Four colors of red, yellow, blue, and green are available, which are able to light up and emit beautiful light, adjust the brightness, or flash under your control. In addition, you can also create installations by cr...

SKU: EF-EF05041 | Brand: ElecFreaks

The PlanetX Waterproof 18B20 Temperature Sensor is a sensor that senses temperature and converts it into a usable output signal. It is waterproof and can be used for temperature measurement. It is usually used for the...

SKU: SF-DEV-15270 | Brand: SparkFun

The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process, gone are the days of rushing around with a pen and composition notebook to simultaneously re...

SKU: AF-3846 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: DF-SEN0628 | Brand: DFRobot

This compact 3D depth-sensing module sits between a simple single-point distance sensor and a full depth camera. It uses an 8×8 Time-of-Flight matrix to return depth data from 64 points, giving your robot or interacti...

SKU: DF-DFR0785-W | Brand: DFRobot

This Gravity LED button is a simple illuminated push button with a transparent cap, designed for interactive Arduino and micro:bit projects. When the button is pressed, the internal white LED turns on to provide clear...

SKU: DF-DFR0785-Y | Brand: DFRobot

This LED-illuminated button module is a simple digital switch with a transparent cap and a yellow light. It works like a basic button, but the internal LED turns on while the button is pressed, giving clear visual fee...

SKU: DF-DFR0785-R | Brand: DFRobot

This compact illuminated push-button module is designed for interactive electronics and quick prototyping. A transparent cap sits over an internal red LED, giving instant visual feedback when the button is pressed.The...

SKU: DF-DFR0785-G | Brand: DFRobot

This compact illuminated push-button module adds a simple, visible input to interactive electronics, classroom prototypes and maker projects. A transparent cap shows the integrated LED, which lights as soon as the but...

SKU: DF-DFR1115-868 | Brand: DFRobot

This Gravity node module is a long-range, low-power wireless communication module for outdoor IoT sensor projects. It is based on the Semtech SX1262 RF chip, uses LoRa modulation, and operates on the EU868 frequency b...