Jumpers & Wires

SKU: SF-CAB-21281 | Brand: SparkFun

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or outside with a clear view of the sky while you stay in doors and warm at your keyboard. This 10m (33') SMA extensi...

SKU: SF-CAB-17983 | Brand: SparkFun

This cable provides a simple way to connect a 2.5mm mono audio plug to two alligator clips. It is made from 22 AWG wire and is 8in. long, making it handy for quick bench connections, testing and temporary hook-ups.One...

SKU: DF-FIT0897 | Brand: DFRobot

This pack includes ten 30 cm Gravity analogue sensor cables, each with a 3-pin PH2.0 plug on one end and DuPont male connectors on the other.The cables are compatible with breadboard and DuPont wire spacing, making th...

SKU: DF-FIT0898 | Brand: DFRobot

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont m...

SKU: DF-FIT0916-F | Brand: DFRobot

These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, gro...

SKU: DF-FIT0902 | Brand: DFRobot

This 3-pin PH2.0 male-to-male cable pack provides compact, tidy connections for modular electronics builds. It is designed for use with Boson modules and the UNIHIKER development board, helping you connect sensors, pe...

SKU: SF-CAB-30513 | Brand: SparkFun

This machine interface cable is made for connecting SparkPNT FP hardware to your own power and data wiring. It provides a secure cable link for integrations where you need to route connections into custom hardware, te...

SKU: SF-CAB-30612 | Brand: SparkFun

Make cleaner, more reliable test connections on the bench with this set of five hook test leads. They are handy for electrical testing and prototyping where a secure, hands-free contact point can make measurements muc...

SKU: SF-CAB-23353 | Brand: SparkFun

This handy cable connects a six pin GHR-06V type locking connector to breadboard-friendly male pins, making it easier to prototype with compact modules.The 1.25mm pitch GHR-06V locking JST connector is commonly found ...

SKU: SF-CAB-29325 | Brand: SparkFun

This short mini coax lead links U.FL-equipped RF submodules and other RF devices to carrier boards. At 50mm long, it is designed to be long enough to make the connection while staying tidy inside compact builds.The 50...

SKU: SF-CAB-17854 | Brand: SparkFun

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are s...

SKU: SF-CAB-27480 | Brand: SparkFun

This 1 metre RF coaxial cable adapts an SMA male connection to a BNC male connection, making it handy for test gear, antennas, RF modules and lab setups that use mixed connector types.It uses RG316-style coax shieldin...

SKU: SF-CAB-09215 | Brand: SparkFun

This handy AVR programming cable combines the common 10-pin and 6-pin ISP programming interfaces in one lead, making it useful when your programmer and target board use different AVR ISP header formats.The cable is ab...

SKU: SF-CAB-19289 | Brand: SparkFun

This simple adapter cable makes it easy to connect between 3-pin JST and 3-pin Molex connectors in your electronics project.It has a 3-pin Molex connector on one end and a 3-pin JST connector on the other, both with 0...

SKU: SF-PRT-29360 | Brand: SparkFun

This hookup cable provides a simple way to connect to a RockBLOCK 9704 module. It has a 2x8 C-Grid III female connector on one end and unterminated bare wires on the other.The 300mm length is suited to making your own...

SKU: SF-DD-18616 | Brand: SparkFun

This handy adapter cable connects a five-pin GHR-05V type locking JST connector to breadboard-friendly male pins, making it easier to prototype with small modules that use compact locking connectors.The 1.25mm pitch G...

SKU: SF-DD-18638 | Brand: SparkFun

This cable adapts a 4-pin JST-ZHR connector to breadboard-compatible male pins, making it easier to prototype with devices that use the common friction-fit ZHR-style JST connection.It is a handy option for connecting ...

SKU: AF-5755 | Brand: Adafruit

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST S...