DFRobot
Gravity 4-Pin PH2.0 to DuPont Male I2C/UART Cable Pack 30cm
· MPN: FIT0898
This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each ca...
This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.
Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker projects. The colour-labelled conductors help you identify power, ground and signal lines while building and troubleshooting.
The cables are compatible with breadboard and DuPont wire spacing, and use materials that are in line with RoHS requirements.
Features:
- Compatible with breadboard and DuPont wire spacing
- Color labeled, convenient for distinguishing
Specifications:
- Withstand voltage: ＜50V
- Withstand current: ＜1000mA
- Length: 30cm
- Interface: 4Pin PH2.0-DuPont male
- I2C: Red – VCC, Black – GND, Blue -- SCL, Green – SDA
- UART: Red – VCC, Black – GND, Blue -- RX, Green -- TX
Ideal for connecting digital sensors to an IO board where you need a neat transition from the Gravity connector to individual male jumper pins.
Jargon buster
Plain-language definitions for the technical terms used above.
- Gravity
- Gravity is DFRobot’s plug-in connector system for sensors, motors and modules, using standard cables to reduce loose jumper wiring. It matters because Gravity-compatible parts can connect directly to these ports, while non-Gravity parts may need adapters or manual wiring.
- Headers
- Rows of metal pins used to plug a module into a breadboard or connect it with jumper wires. Pre-soldered headers make the module easier to use straight away without needing to solder the pins yourself.
- I2C
- I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
- UART
- UART is a simple serial connection that sends data over separate transmit and receive wires, often labelled TX and RX. It matters because this module is designed to replace a wired UART cable with a wireless link while keeping the same serial data format.
Find this product in
Supplier page — dfrobot.com
Supplier Description · 168.7 KB · Click any page to view full size
