Gas & Air Quality Sensors
Gas sensors, air quality monitors, and environmental sensors — CO2 (SCD40/41), VOC (SGP30/40), particulate matter (PMSA003I), smoke, alcohol, and multi-gas sensors.
Gravity: HCL Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0474 | Brand: DFRobot
This is a sensor that detects hydrogen chloride concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentr...
Delivered by Tue 20 Oct
SparkFun MicroMod Environmental Function Board
SKU: SF-SEN-18632 | Brand: SparkFun
The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This Function Board includes three sensors to monitor air quality (SGP40), humidity & temperature (S...
Delivered by Tue 20 Oct
Fermion: SGP40 Air Quality Sensor (Breakout)
SKU: DF-SEN0392 | Brand: DFRobot
The SGP40 Air Quality sensor adopts the new SGP40 digital VOC sensor chip launched by the well-known Sensirion. Based on the Sensirion’s CMOSens® technology, the SGP40 offers a complete sensor system on a single chip,...
Delivered by Tue 20 Oct
BME680 Environmental Sensor Module
SKU: DF-SEN0375 | Brand: DFRobot
BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. It is designed for air quality monitor, and du...
Delivered by Fri 9 Oct
Dual Gas CO and CH4 Detection Sensor - MQ-9B
SKU: SF-SEN-17050 | Brand: SparkFun
The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...
Delivered by Tue 20 Oct
Smoke Sensor - MQ-2
SKU: SF-SEN-17049 | Brand: SparkFun
The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...
Delivered by Tue 20 Oct
Hydrogen Sulfide Gas Sensor - MQ-136
SKU: SF-SEN-17052 | Brand: SparkFun
The MQ-136 is a Hydrogen Sulfide detection sensor with a sensing range of 1 - 200ppm. The sensing element is SnO2, which has lower conductivity in clean air. When H₂S gas exists, the sensor’s conductivity gets higher ...
Delivered by Tue 20 Oct
Ammonia Gas Sensor - MQ-137
SKU: SF-SEN-17053 | Brand: SparkFun
The MQ-137 is an ammonia (NH3) gas sensor from Winsen, designed to detect ammonia concentrations in the air. The sensing element is tin dioxide (SnO2), which has lower conductivity in clean air and increases in conduc...
Delivered by Tue 20 Oct
Octopus Smoke Sensor MQ-2 Brick OBMQ2
SKU: EF-EF04029 | Brand: ElecFreaks
An analogue gas sensor module based on the MQ-2 sensor, part of the Octopus Electronic Bricks series for plug-and-play integration with Arduino and compatible boards. Detects a wide range of combustible gases and smok...
Delivered by Fri 23 Oct
Gravity: Arduino Propane Gas Sensor (MQ6)
SKU: DF-SEN0131 | Brand: DFRobot
INTRODUCTION This is an Arduino Propane Gas Sensor. It uses MQ6 probe to detect iso-butane, propane and liquefied petroleum gas (LPG). It is less sensitive with alcohol, cooking fumes an...
Delivered by Tue 20 Oct
Gravity: Arduino Alcohol Sensor (MQ3)
SKU: DF-SEN0128 | Brand: DFRobot
An analogue alcohol gas sensor based on the MQ-3 probe, designed for use with Arduino and other microcontrollers. The sensor outputs a voltage proportional to the concentration of alcohol vapour in the surrounding air...
Delivered by Fri 9 Oct
Adafruit MiCS5524 CO, Alcohol and VOC Gas Sensor Breakout
SKU: AF-3199 | Brand: Adafruit
The Adafruit MiCS-5524 Gas Sensor Breakout is a robust MEMS sensor from SGX Sensortech for detecting carbon monoxide, natural gas leaks, alcohol, and volatile organic compounds (VOCs). It provides a simple analogue vo...
Delivered by Mon 2 Nov
Gravity: Formaldehyde (HCHO) Sensor (Arduino Raspberry Pi Compatible)
SKU: DF-SEN0231 | Brand: DFRobot
The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in a...
Delivered by Tue 20 Oct
Carbon Monoxide Sensor - MQ-7
SKU: SF-SEN-09403 | Brand: SparkFun
This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and f...
Delivered by Tue 20 Oct
SGP41 VOC & NOx Gas Sensor Breakout
SKU: AF-6455 | Brand: Adafruit
Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...
Delivered by Mon 2 Nov
ZMOD4450 Refrigeration Air Quality Gas Sensor Module
SKU: SF-COM-21506 | Brand: SparkFun
The ZMOD4450 is a compact gas sensor module for detecting gases associated with food ripening or rotting. It is intended for refrigeration air quality (RAQ) applications such as food storage and shipping, including hu...
Delivered by Tue 20 Oct