Environmental (temperature, humidity, air quality)

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: DF-SEN0206 | Brand: DFRobot

INTRODUCTION We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the se...

SKU: DF-DFR0023 | Brand: DFRobot

This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.The LM35 chip is produced by National Semiconductor Corporation and offers a fun...

SKU: DF-DFR0067 | Brand: DFRobot

This Gravity-compatible DHT11 sensor provides calibrated digital temperature and humidity readings via a single data pin. With an integrated 8-bit microcontroller and factory-calibrated coefficients stored in OTP memo...

SKU: DF-DFR0588 | Brand: DFRobot

Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sens...

SKU: EF-EF05032 | Brand: ElecFreaks

An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alco...

SKU: EF-EF04079 | Brand: ElecFreaks

Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...

SKU: EF-EF05031 | Brand: ElecFreaks

The gas sensor is an essential sensor for environmental detection. ELECFREAKS PlanetX MQ2 Sensor can be used for smoke detection, the greater the smoke is, the greater the voltage value will be. It is able to detect t...

SKU: EF-EF05030 | Brand: ElecFreaks

The gas sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX CO2 Sensor is designed to detect the concentration of CO2 with high sensitivity. The higher the concentration of CO2 is, the sm...

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: DF-DFR0280 | Brand: DFRobot

Sharp GP2Y1010AU Dust Sensor requires some wiring on the breadboard and a list of components to make it Arduino compatible. This has turned down several people due to the thin wires of the sharp sensor making it ...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...