Current & Voltage Sensors

SKU: LB-LS0221 | Brand: Little Bird

The CJMCU-226 INA226 is a powerful voltage, current, and power monitoring module designed for high precision in both high-side and low-side sensing applications. With its bi-directional current sensing capability and ...

SKU: EC-SEL71220A | Brand: Elecrow

A current sensing module based on the Allegro ACS712 Hall effect sensor, capable of accurately measuring both AC and DC current up to ±20 A. The module outputs a proportional analogue voltage that can be read directly...

SKU: AF-4226 | Brand: Adafruit

The Adafruit INA260 is a precision DC power sensor that measures current, voltage, and power on either the high or low side of your circuit. With an integrated 2 mΩ (0.002Ω) 0.1% shunt resistor and 16-bit ADC, it hand...

SKU: DF-SEN0211 | Brand: DFRobot

INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this p...

SKU: PL-1185 | Brand: Pololu

The ACS714 Current Sensor Carrier provides a compact breakout for Allegro's ±5A ACS714 Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV R...

SKU: DF-SEN0214 | Brand: DFRobot

The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design ...

SKU: AF-6349 | Brand: Adafruit

The Adafruit INA238 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...

SKU: AF-6340 | Brand: Adafruit

The Adafruit INA237 is a precision DC power monitor capable of measuring current, voltage, and power on either the high or low side of your circuit. With support for up to +85V DC common-mode voltage and a 16-bit ADC,...

SKU: DF-SEN0098-V2 | Brand: DFRobot

##Introduction This is an updated version. Retired Product: Gravity: Analog 50A Current Sensor (AC/DC) V1Get this low-power current sensor to monitor your project every second for saving energy or protecting the circu...

SKU: DF-SEN0288 | Brand: DFRobot

A non-contact AC current sensor with a clamp-on transformer probe, capable of measuring 0–10 A AC. Simply clamp the probe around an AC line and connect the 3.5 mm plug to the signal conversion module — no wire cutting...

SKU: DF-SEN0287 | Brand: DFRobot

When you want to measure the AC current, are you still having trouble cutting the wires, wiring or soldering. Gravity: Analog AC Current Sensor comes to the rescue, eliminating the need to cut wires or reconnect circu...

SKU: AF-3650 | Brand: Adafruit

The Adafruit INA219 FeatherWing is a high-side current and voltage sensor that stacks onto any Feather development board. Using the INA219B chip over I2C, it measures both DC current draw and bus voltage with 1% preci...

SKU: AF-5832 | Brand: Adafruit

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide com...

SKU: SF-SEN-31437 | Brand: SparkFun

Monitor DC current and power over I2C with this Qwiic breakout based on the Texas Instruments INA237 digital power monitor. It measures current, bus voltage, internal temperature and power for an in-line DC input usin...

SKU: SF-SEN-31438 | Brand: SparkFun

This compact Qwiic breakout uses the Texas Instruments INA228 digital power monitor to measure DC current and power with high precision over I2C. The onboard 20-bit delta-sigma ADC supports readings for current, volta...

SKU: PL-2453 | Brand: Pololu

A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...

SKU: PL-4049 | Brand: Pololu

The ACS724 Current Sensor Carrier provides a compact breakout for Allegro's ±50A ACS724LLCTR-50AB Hall effect-based linear current sensor. It offers a low-resistance (~1.2 mΩ) current path and electrical isolation up ...

SKU: EC-SEL7125A | Brand: Elecrow

The ACS712 Current Sensor (5A) provides a simple way to measure AC or DC current up to ±5A. Based on the Allegro ACS712 Hall effect sensor, this module outputs a proportional analogue voltage that can be read directly...