Circuitry & IOT
Explore our range of circuitry and IoT products for Digital Technologies education across Australia. From electronic components and crimp connectors to complete IoT kits, you'll find everything needed to teach and learn circuit design and the Internet of Things.
Ideal for classrooms, STEM programs, makers, and hobbyists, this collection covers individual components, accessories, and ready-to-go project kits — with fast shipping Australia-wide.
Premium Female/Male 'Extension' Jumper Wires - 40 x 3 (75mm)
SKU: AF-825 | Brand: Adafruit
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are approximately 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1...
Delivered by Thu 15 Oct
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Thu 15 Oct
ESP32-C6 RISC-V Smartwatch Dev Board – 2.06" AMOLED, WiFi 6/Bluetooth 5/Zigbee
SKU: WS-32769 | Brand: Waveshare
The ESP32-C6 Touch AMOLED 2.06 is a smartwatch-style development board built around the ESP32-C6 RISC-V processor. Featuring a vibrant 2.06" AMOLED touchscreen, WiFi 6, Bluetooth 5, and Zigbee connectivity, it's a com...
Delivered by Thu 15 Oct
Learn to Solder - DIY Ultrasonic Ranging Electronic Kit
SKU: LB-LS6569 | Brand: Little Bird
A DIY soldering kit that builds into a functional ultrasonic distance meter. Using an HC-SR04 ultrasonic sensor, STC89C52 microcontroller, and 3-digit 7-segment display, this kit measures distances from 5cm to 4m with...
Delivered by Thu 15 Oct
ELECFREAKS micro:bit Jacdac Smart Exploration Kit
SKU: EF-EF08431 | Brand: ElecFreaks
Description The ELECFREAKS jacdac smart exploration kit, which is based on micro:bit V2, is equipped with a variety of jacdac series sensors, including jacdac expansion boards, button sensors, light sensors...
Delivered by Thu 15 Oct
ELECFREAKS micro:bit Petal Smart Home Explorer Kit
SKU: EF-EF08435 | Brand: ElecFreaks
Description The ELECFREAKS micro:bit Petal Smart Home Explorer Kit is a hands-on learning suite designed for teenagers aged 8-16. Using sensors, servobs, and assemblable structural components enables...
Delivered by Thu 15 Oct
Arduino UNO R4 Minima Development Board
SKU: DF-DFR1085 | Brand: DFRobot
##Introduction The new Arduino UNO R4 comes in two versions: the UNO R4 WiFi and the UNO R4 Minima. It runs on the Renesas RA4M1 (Arm Cortex®-M4) processor, with a clock speed of 48MHz, which provides a 3x increase ov...
Delivered by Thu 15 Oct
Adafruit ESP32-S3 TFT Feather - 4MB Flash, 2MB PSRAM, STEMMA QT
SKU: AF-5483 | Brand: Adafruit
The Adafruit ESP32-S3 TFT Feather features a built-in 1.14" IPS colour TFT display (240×135 pixels, ST7789) on the front of the board. Combined with the dual-core ESP32-S3's native USB, Wi-Fi, Bluetooth LE, 4 MB flash...
Delivered by Thu 15 Oct
ESP32-C3-MINI-1-N4 Module (PCB antenna)
SKU: DF-DFR0809 | Brand: DFRobot
The ESP32-C3-MINI-1-N4 is a compact Wi-Fi and Bluetooth Low Energy module from Espressif, built around the ESP32-C3FN4 chip with a 32-bit RISC-V single-core processor running at up to 160 MHz. It includes 4 MB of embe...
Delivered by Thu 15 Oct
Breadboard Friendly I2C Temperature Sensor - TC74A0
SKU: AF-4375 | Brand: Adafruit
A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitorin...
Delivered by Thu 15 Oct
Adafruit ItsyBitsy RP2040
SKU: AF-4888 | Brand: Adafruit
The Adafruit ItsyBitsy RP2040 brings the Raspberry Pi RP2040 to the compact ItsyBitsy form factor. Featuring a dual-core Cortex M0+ running at 125 MHz, 264 KB RAM, and 8 MB of SPI Flash, it packs serious power into a ...
Delivered by Thu 15 Oct
MindPlus Coding Kit for Arduino
SKU: DF-KIT0152-EN | Brand: DFRobot
MindPlus Coding Kit for Arduino is a set of tools for programming learning. As its compatibility for Mind+, a graphical coding software for starters, and Arduino IDE, this kit is well applicable to students from the l...
Delivered by Thu 15 Oct
SparkFun Thing Plus - RP2040
SKU: SF-DEV-17745 | Brand: SparkFun
The SparkFun Thing Plus - RP2040 is a low-cost, high performance board with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Besides the Thing Plus or Feather footprint (w...
Delivered by Thu 15 Oct
Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
SKU: EF-EF04079 | Brand: ElecFreaks
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...
Delivered by Thu 15 Oct
Premium Silicone Covered Male-Male Jumper Wires - 200mm x 40
SKU: AF-4482 | Brand: Adafruit
These premium male-male jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 40 (10 pieces of red, blue, yellow, and Adafruit bl...
Delivered by Thu 15 Oct
Experiment box for micro:bit (with micro:bit)
SKU: EF-EF08199 | Brand: ElecFreaks
ParameterSKU: EF08199/EF08200 The board: micro:bit Coding language: makecode\python\C++ Power supply: 2 x AA Connection line: banana line Size: 25X17.6X...
Delivered by Thu 15 Oct
micro:IO Extender- a micro:bit IO Expansion Board
SKU: DF-MBT0008 | Brand: DFRobot
The micro:IO Extender is a compact expansion board for the BBC micro:bit that breaks out all 19 I/O pins as Gravity-compatible 3-pin headers. It provides plug-and-play access to the full range of micro:bit GPIO, along...
Delivered by Thu 15 Oct
Chibitronics Circuit Stickers Effects Add-On Pack
SKU: SF-DEV-14596 | Brand: SparkFun
If you already have or are looking to own some Circuit Stickers from Chibitronics you may be looking to add a few effects to your LEDs. The LED Effects Add-On Pack provides you with four unique stickers to make your L...
Delivered by Thu 15 Oct
Gravity IoT Starter Kit for micro:bit
SKU: DF-KIT0138 | Brand: DFRobot
IoT Starter Kit is an all-in-one bundle for micro:bit beginners to fast experience and build Internet of Things projects.The kit comes with a micro:bit microcontroller, a Wi-Fi module and 7 sensors/actuators that are ...
Delivered by Thu 15 Oct
1 X AA Battery Holder
SKU: TB-PH9203 | Brand: Little Bird
This holder provides a simple way to add one AA cell to a battery-powered project. It is moulded in Delrin and uses corrosion-resistant nickel-plated springs and studs for reliable contact.The 150 mm bare lead connect...
Delivered by Thu 15 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
