Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit
SKU: AF-2327 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo HAT adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — c...
Delivered by Mon 31 Aug
Micro Servo - High Powered, High Torque Metal Gear
SKU: AF-2307 | Brand: Adafruit
This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, o...
Delivered by Mon 31 Aug
Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit [MPR121]
SKU: AF-2340 | Brand: Adafruit
The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...
Delivered by Fri 7 Aug
USB Power Only Cable with Switch - A/MicroB
SKU: AF-2379 | Brand: Adafruit
A USB-A to Micro-B power-only cable with a built-in inline on/off switch. Perfect for powering a Raspberry Pi or any Micro USB device from a USB power supply, with the convenience of a physical power switch — no need ...
Delivered by Mon 31 Aug
HDMI 7 800x480 Display Backpack - With Touchscreen
SKU: AF-2407 | Brand: Adafruit
Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any computer that has HDMI output, and the shape makes it easy to attach to a case or rail. This ...
Delivered by Mon 31 Aug
Adafruit HUZZAH ESP8266 Breakout
SKU: AF-2471 | Brand: Adafruit
The Adafruit HUZZAH ESP8266 Breakout is a breadboard-friendly WiFi microcontroller board built around the Espressif ESP8266. With an 80 MHz processor, full WiFi client and access point support, a built-in TCP/IP stack...
Delivered by Fri 7 Aug
Light Disc with 7 SMD RGB LED
SKU: DF-DFR0106 | Brand: DFRobot
This fantastic light disc consists of 7 SMD RGB LED. It illustrates a beautiful color combination much better than traditional RGB led. You can control the LEDs via the RGB pins. By pulse-width-modulating the pins an...
Delivered by Tue 18 Aug
Jumper Wires 9 F/F (10 Pack)
SKU: DF-FIT0030 | Brand: DFRobot
These 23 cm (9″) female-to-female jumper wires are a prototyping essential. Use them to connect between male headers on Arduino boards, IO shields, sensors, and breadboards. Multiple wires sit neatly side by side on s...
Delivered by Fri 7 Aug
40 Pin Break Away Male Header- Right Angle-10 Pcs
SKU: DF-FIT0100 | Brand: DFRobot
A pack of 10 right-angle male header strips, each with 40 breakable pins at 2.54mm pitch. The 90° bend allows horizontal connections from vertically mounted PCBs, ideal for compact enclosures and edge-mounted connecto...
Delivered by Fri 7 Aug
Adafruit Trinket - 3V3
SKU: AF-1500 | Brand: Adafruit
The Adafruit Trinket 3V3 is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a singl...
Delivered by Fri 7 Aug
40 Pin Break Away Male Header- Long Straight-10 Pcs
SKU: DF-FIT0105 | Brand: DFRobot
A pack of 10 long straight male header strips, each with 40 breakable pins at 2.54mm pitch. The extended 10mm pin length allows socket-to-socket connections, and the plastic separator can be repositioned along the pin...
Delivered by Fri 7 Aug
USBtinyISP-Arduino bootloader programmer
SKU: DF-DFR0116 | Brand: DFRobot
This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino. This programmer works ...
Delivered by Fri 7 Aug
Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino (Pre-Order)
SKU: DF-SEN0237-A | Brand: DFRobot
Measure dissolved oxygen in water for aquaculture, environmental monitoring, natural science projects and general water-quality work. This DFRobot Gravity kit pairs a galvanic dissolved oxygen probe with an analogue s...
Delivered by Tue 18 Aug
9V to Barrel Jack Adapter
SKU: DF-FIT0131 | Brand: DFRobot
A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development...
Delivered by Tue 18 Aug
Pololu Basic 2-Channel SPDT Relay Carrier with 5VDC Relays (Assembled)
SKU: PL-2485 | Brand: Pololu
The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes rea...
Delivered by Fri 7 Aug
JST 4 Holes Female Connector
SKU: DF-FIT0150 | Brand: DFRobot
This product includes 4-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (40 units). They work with wires ranging from 28 to 26 AWG. SPECIFICATIONS 4-pin 2.0mm mating connector housing 28 to 26 A...
Delivered by Fri 7 Aug
JST 3 Holes Female Connector
SKU: DF-FIT0149 | Brand: DFRobot
A pack of 3-pin JST-style 2.0 mm pitch female connector housings with matching crimp pins. Ideal for making custom cables and connectors for sensors, servos, and other small electronics that use 2.0 mm pitch connector...
Delivered by Tue 18 Aug
LilyPad ProtoSnap Plus
SKU: SF-DEV-14346 | Brand: SparkFun
The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap...
Delivered by Fri 7 Aug
Stackable Header - 8 Pin (Extended)
SKU: DF-FIT0165 | Brand: DFRobot
An 8-pin female stackable header with extended legs, designed for stacking Arduino shields and prototyping boards. The extra-long pins pass through one board and connect to the next, making it easy to build multi-laye...
Delivered by Tue 18 Aug
USB Voltage Meter with OLED Display
SKU: AF-2690 | Brand: Adafruit
This USB In-Line Voltage and Current Meter with OLED Display is a lot like the Charger Doctor we carry - if the doctor was a talented surgeon who just lost her medical license and has nothing to lose...
Delivered by Fri 7 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
