Brands and Manufacturers

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: AF-158 | Brand: Adafruit

Hall effect sensors detect whether a magnet is near. Useful for non-contact/waterproof type switches, position sensors, rotary/shaft encoders. I tried dozens of different hall effect sensors to see which one wou...

SKU: SF-SEN-10266 | Brand: SparkFun

Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes. The...

SKU: SF-COM-16473 | Brand: SparkFun

The classic 555 timer/oscillator IC from Texas Instruments — one of the most versatile and widely used integrated circuits in electronics. With just a few external resistors and capacitors, it can generate timing dela...

SKU: LB-LR0285 | Brand: Little Bird

Feature: 0.5°C Ensured Accuracy (+25°C) Suitable for Remote Applications Low Cost Due to Wafer-Level Trimming Operates from 4 to 30 V Less than 60-μA Current Drain Low Self-Heating, 0.08°C in Still Air Low Impedance O...

SKU: AF-161 | Brand: Adafruit

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...

SKU: AF-3930 | Brand: Adafruit

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. Whit...

SKU: AF-157 | Brand: Adafruit

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller.To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to...

SKU: AF-4489 | Brand: Adafruit

Run two solenoids, or a single DC motor with up to 800mA per channel using the super-simple L9110H H-bridge driver. This bridge chip is an 8 DIP package so it's easy to fit onto any breadboard or perfboard.Each chip c...

SKU: SF-SEN-10289 | Brand: SparkFun

This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a...

SKU: SF-SEN-19018 | Brand: SparkFun

An Infrared detector is a detector that reacts to infrared (IR) radiation. These simple devices operate at 940nm and work well for generic IR systems including remote control and touch-less object sensing. Using a sim...

SKU: DF-FIT0180 | Brand: DFRobot

This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. Thes...

SKU: AF-4763 | Brand: Adafruit

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order...

SKU: AF-5678 | Brand: Adafruit

The W25Q64JVXGIQ is a 3V 64Mbit (8MB) QSPI NOR flash memory chip in a standard SOIC-8 package. Ideal for storing code, assets, configurations, audio clips, and data logs on microcontroller projects — offering more sto...

SKU: AF-3877 | Brand: Adafruit

A hex Schmitt-trigger inverter IC that doubles as a handy logic level shifter. The 74AHCT14 provides six independent inverter channels, each with Schmitt-trigger inputs for clean switching on noisy or slow-transitioni...

SKU: PI-COM0211 | Brand: Pimoroni

Take control of your voltage! These regulators will let you produce a reliable constant supply voltage for your circuits. Whether you're working from an unregulated supply or just need a precise voltage for your micro...

SKU: SF-COM-10953 | Brand: SparkFun

The MMA8452Q is a low-power, 3-axis capacitive MEMS accelerometer with 12-bit resolution. Packed with embedded motion-detection functions and configurable interrupt outputs, it can monitor events autonomously while st...

SKU: EC-AAM328AT | Brand: Elecrow

This is a ATmega328 IC in DIP package, pre-loaded with the Arduino Optiboot (Atmega328 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino...

SKU: PI-COM0212 | Brand: Pimoroni

Take control of your voltage! These regulators will let you produce a reliable constant supply voltage for your circuits. Whether you're working from an unregulated supply or just need a precise voltage for your micro...