Brands and Manufacturers

SKU: RP-SC0329 | Brand: Raspberry Pi Ltd

Raspberry Pi Sense HAT V2 — Your Mission Control for Data, Dazzle, and DIY Experiments!What if your Raspberry Pi could sense everything—orientation, weather, movement, your own code-controlled lightshow…and let you in...

SKU: LB-24-LIGHT | Brand: Little Bird

Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or photoconductors.   It has four pins:3.3V  : While 'VCC'...

SKU: EC-CRF1356KIT | Brand: Elecrow

This RFID kit includes a 13.56M RF reader module, which use the RC522 IC, plus 2 S50 RFID cards to help you learn and add the 13.56 MHz RF transition to your project. The MF RC522 is a highly integrated transmission m...

SKU: WS-19343 | Brand: Waveshare

A dual GPIO expander board for the Raspberry Pi Pico that duplicates all GPIO pins into two sets of 2×20 male headers. Plug your Pico into the centre female socket, then connect two expansion modules simultaneously — ...

SKU: LB-LR0214-148A | Brand: Little Bird

This PN532-based NFC module is designed for near field communication projects in the 13.56MHz range, with a maximum communication distance of 30mm.The board includes its own antenna and can communicate via SPI, IIC (I...

SKU: AF-3421 | Brand: Adafruit

The Adafruit I2S MEMS Microphone Breakout features the SPH0645LM4H, a tiny digital MEMS microphone with a purely digital I2S output. Unlike analogue electret microphones, this mic sends digital audio data directly to ...

SKU: AF-4682 | Brand: Adafruit

The Adafruit Micro SD SPI or SDIO Card Breakout Board gives you fast microSD card access using either standard SPI or the higher-speed SDIO protocol. Unlike SPI-only breakouts, this board exposes the full SDIO bus wit...

SKU: LB-LR0307 | Brand: Little Bird

Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...

SKU: WS-7965 | Brand: Waveshare

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART ...

SKU: AF-2028 | Brand: Adafruit

This is the assembled version of the Pi T-Cobbler Plus.  It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector)The Raspberry Pi has landed on the Maker World like a 40...

SKU: PJ-TEENSY4 | Brand: Little Bird

The Teensy 4.0 is a high-performance microcontroller development board powered by the NXP iMXRT1062 ARM Cortex-M7 processor running at 600 MHz. Despite its compact 35.6 × 17.8 mm (1.4 × 0.7") form factor — the same si...

SKU: EC-CIN3232RT | Brand: Elecrow

This module can be used to convert the RS232 voltage of PC to TTL voltage that used by microcontroller. Directly plug the DB9 connector your PC then you can communicate with the microcontrollers using the Serial port....

SKU: AF-4484 | Brand: Adafruit

The Adafruit Mini PiTFT 1.3" is a compact 240×240 pixel IPS colour display that snaps directly onto any Raspberry Pi via the GPIO header. With vibrant colours and excellent viewing angles, it's ideal for adding a user...

SKU: PR-PIM373 | Brand: Little Bird

The VL53L1X Time of Flight sensor breakout uses a low-power laser to measure distances with excellent accuracy and speed. With a detection range of 4 cm to 4 metres and up to 50 Hz sampling frequency, it's ideal for p...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: LB-HS2343 | Brand: Little Bird

Introducing the TTGO T-Watch-2020, a cutting-edge wearable device that seamlessly combines technology and style. Powered by the ESP32 main chip, this innovative gadget boasts a 1.54-inch touch display, offering i...

SKU: AF-5323 | Brand: Adafruit

The Adafruit ESP32-S3 Feather with STEMMA QT brings the dual-core ESP32-S3 to the Feather ecosystem with Wi-Fi, Bluetooth LE, and native USB. This version comes with 8 MB flash, 512 KB SRAM, and no PSRAM — suitable fo...

SKU: AF-4900 | Brand: Adafruit

The Adafruit QT Py RP2040 puts the popular Raspberry Pi RP2040 chip into the tiny QT Py form factor. With dual-core ARM Cortex-M0+ running at 125 MHz, 264 KB SRAM, 8 MB flash, native USB, and a STEMMA QT connector, it...

SKU: SF-WRL-20168 | Brand: SparkFun

The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management ...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...