Brands and Manufacturers

SKU: AF-1194 | Brand: Adafruit

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. T...

SKU: AF-1272 | Brand: Adafruit

The Adafruit Ultimate GPS Logger Shield combines the popular Ultimate GPS module with a MicroSD card slot, giving your Arduino a complete GPS datalogging solution. Built around the MTK3339 chipset, it tracks up to 22 ...

SKU: PI-COM0422 | Brand: Pimoroni

Classic arcade buttons in a variety of colours.Ever feel the need to relive the glory days of button mashing in your local arcade?Or possibly you just need to add a button to your project and want something a little m...

SKU: AF-1313 | Brand: Adafruit

Listen up! This 3" diameter speaker cone is the perfect addition to any audio project where you need an 8 ohm impedance and 1W or less of power. We particularly like this cone as it has 4 handy mounting tabs 60mm a...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: AF-3984 | Brand: Adafruit

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, bas...

SKU: AF-3942 | Brand: Adafruit

The HC-SR04 is an ultrasonic distance sensor that measures distances from approximately 2 cm to 400 cm (best results between 10–250 cm). Widely used in robotics, automation, interactive art, and motion sensing project...

SKU: AF-3928 | Brand: Adafruit

The Adafruit CRICKIT for micro:bit is a robotics and electronics driver board designed for the BBC micro:bit. Plug your micro:bit into the 40-pin edge connector and start controlling motors, servos, solenoids, NeoPixe...

SKU: LI-660-0005 | Brand: Little Bird

The littleBits Mounting Boards let you keep your circuit intact and move it around with ease. Simply snap together your littleBits circuit and press the module feet into the holes of the mounting board. Boards come 2 ...

SKU: SF-COM-15107 | Brand: SparkFun

For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data, and still dwarfs older memory systems like magnetic core memory.This card is...

SKU: AF-3875 | Brand: Adafruit

This 5V electromagnet provides 25kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for controllab...

SKU: AF-3915 | Brand: Adafruit

Keep your Circuit Playground Express safe in this snap-together acrylic enclosure. Designed by Ada-friend Mike Doell, this minimal but elegant case turns your board into an electronic snowflake shape with no tools req...

SKU: DF-SEN0240 | Brand: DFRobot

The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through d...

SKU: AF-1501 | Brand: Adafruit

The Adafruit Trinket 5V is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a single...

SKU: AF-1467 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: LB-LR0607 | Brand: Little Bird

Handy little steel ruler.  20cm long with plastic sleeve to keep it in.

SKU: SF-TOL-14579 | Brand: SparkFun

Do you need help soldering a difficult project, reworking a botched pin or just making your life easier? This 10mL no-clean flux pen from Chip Quik® is great for all of your solder, desolder, rework and reflow purpose...

SKU: SF-CAB-14576 | Brand: SparkFun

These 4-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...

SKU: SF-CAB-14575 | Brand: SparkFun

These 3-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use fo...

SKU: LB-LR0214-73A | Brand: Little Bird

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered...