Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Conductive Rubber Cord Stretch Sensor + extras!
SKU: AF-519 | Brand: Adafruit
Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of carbon-black impregnated rubber. Usually this material is used for EMF gasketing,...
Delivered by Thu 15 Oct
SparkFun MIDI Shield
SKU: SF-DEV-12898 | Brand: SparkFun
The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other ...
Delivered by Thu 15 Oct
LED - RGB Addressable, PTH, 8mm (5 Pack)
SKU: SF-COM-12877 | Brand: SparkFun
We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it i...
Delivered by Thu 15 Oct
UHF RFID Classic Tag
SKU: DF-FIT0373 | Brand: DFRobot
INTRODUCTION Are you still looking for a UHF RFID tag for your UHF RFID reader? Try this one! This RFID tag Alien higgs3 chip accords with ISO 18000-6C,EPC Class1 Gen2 standard protocol.Besides, it contains ...
Delivered by Thu 15 Oct
UHF RFID Sticker
SKU: DF-FIT0374 | Brand: DFRobot
INTRODUCTION Are you still looking for a UHF RFID tag for your UHF RFID reader? Try this one, this UHF tag accords with ISO 18000-6C,EPC Class1 Gen2 standard protocol. It contains 96 bit EPC...
Delivered by Thu 15 Oct
Romeo BLE mini -Small Arduino Robot Controller with Bluetooth 4.0
SKU: DF-DFR0351 | Brand: DFRobot
INTRODUCTION Romeo BLE mini is a small Arduino compatible robot control board with motor driver and bluetooth 4.0. It benefits from the Arduino open source platform, which includes thousa...
Delivered by Mon 26 Oct
Header - 2x3 (Male, 0.1)
SKU: SF-PRT-12807 | Brand: SparkFun
A standard 2×3 male through-hole header with 0.1″ (2.54 mm) pin spacing. This is the common configuration used for ISP (In-System Programming) connectors on AVR microcontroller boards and programmers. Key Features ...
Delivered by Mon 26 Oct
Needle Set
SKU: SF-TOL-10405 | Brand: SparkFun
This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick f...
Delivered by Thu 15 Oct
32x32 RGB LED Matrix Panel - 4mm Pitch
SKU: AF-607 | Brand: Adafruit
A 32×32 full-colour RGB LED matrix panel with 1024 LEDs at 4mm pitch, measuring approximately 5 inches (128mm) square. These panels are commonly used in video walls and signage, delivering bright, vivid colours with g...
Delivered by Fri 6 Nov
Tilt Sensor - AT407
SKU: SF-SEN-10289 | Brand: SparkFun
This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a...
Delivered by Thu 15 Oct
Load Sensor - 50kg
SKU: SF-SEN-10245 | Brand: SparkFun
A single-point load cell (strain gauge) rated for up to 50 kg. This is the same type of sensor found in digital bathroom scales. It outputs a small analogue voltage proportional to the applied force, which can be read...
Delivered by Thu 15 Oct
PICAXE 18M2+ Microcontroller (18 pin)
SKU: SF-COM-10187 | Brand: SparkFun
The new generation 18 pin PICAXE microcontroller now has parallel tasking, touch sensors and more memory/RAM. See the Info Sheet for a comparison of features between the 18M2 and the 18M2+ PICAXE is a neat entr...
Delivered by Mon 26 Oct
Audio Jack - 3.5mm TRRS (SMD)
SKU: SF-PRT-12639 | Brand: SparkFun
A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an addition...
Delivered by Thu 15 Oct
Arduino CAN BUS Shield
SKU: DF-DFR0370 | Brand: DFRobot
The Arduino CAN BUS Shield V2 brings Controller Area Network (CAN bus) communication to your Arduino. Built around the MCP2515 CAN controller, it supports both standard and extended frames for transmitting and receivi...
Delivered by Mon 26 Oct
Terminal Block - 2-pin 3.5mm - pack of 5!
SKU: AF-724 | Brand: Adafruit
Screw terminal blocks are the clean, maintainable solution for PCB-to-wire connections — no solder, no loose ends, easy to swap out later. These 3.5mm pitch 2-pin blocks are a practical size: wide enough for a range o...
Delivered by Thu 15 Oct
ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)
SKU: AF-163 | Brand: Adafruit
A precision triple-axis accelerometer breakout featuring the Analog Devices ADXL335. With a ±3 g measurement range and analog outputs for X, Y, and Z axes, this sensor is ideal for tilt sensing, motion detection, and ...
Delivered by Thu 15 Oct
Tweezers - Curved (cross-lock, ESD Safe)
SKU: SF-TOL-12572 | Brand: SparkFun
These are nice, cross-locking, curved tweezers, unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with ...
Delivered by Mon 26 Oct
IC Hook with Pigtail
SKU: SF-CAB-09741 | Brand: SparkFun
These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of grabbing very small points (like SOIC IC legs). Comes in a bag of five IC hooks of d...
Delivered by Mon 26 Oct
Arduino Quad DC Motor Driver Shield
SKU: DF-DRI0039 | Brand: DFRobot
INTRODUCTION The latest quad motor driver shield for Arduino, compatible with 5V/3.3V Arduino controller, can control up to four DC motors with 8 pins at the same time. The shield supports P...
Delivered by Mon 26 Oct
Arduino Nano IO Sensor Shield
SKU: DF-DFR0012 | Brand: DFRobot
The Arduino Nano I/O Sensor Shield acts as an expansion board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input. The form factor of the Nano I/O Shield bo...
Delivered by Mon 26 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
