Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Wide Band 4G LTE Internal LoRa Antenna
SKU: SF-WRL-17841 | Brand: SparkFun
A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connect...
Delivered by Tue 13 Oct
Lipo Charger-Type C
SKU: DF-DFR0668 | Brand: DFRobot
This is a Type-C Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. The charger adopts TP4056X lithium battery charging IC, which guar...
Delivered by Tue 13 Oct
W5100 Ethernet Shield for Arduino
SKU: EC-ASW51001E | Brand: Elecrow
The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100ethernet chip . The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up...
Delivered by Tue 13 Oct
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
SKU: AF-4528 | Brand: Adafruit
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and m...
Delivered by Tue 13 Oct
Jumper Caps for Crack the Code Shield bag of 100
SKU: LB-CTC-CAPS | Brand: Little Bird
These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. The Crack the Code shield uses these on the buzzer module. These little j...
Delivered by Tue 13 Oct
Through-Hole Resistors - 100 ohm 5% 1/4W - Pack of 25
SKU: AF-4293 | Brand: Adafruit
ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 100Ω Resistors. More specifically, they are carbon film, through-hole axi...
Delivered by Wed 4 Nov
Micro:Bit smart Science IoT kit (without Micro:Bit)
SKU: EF-EF08203 | Brand: ElecFreaks
The Smart Science IoT Kit from ElecFreaks is a comprehensive sensor and IoT learning kit built around the IoT:bit breakout board for micro:bit. It combines environmental sensors with WiFi connectivity, allowing studen...
Delivered by Tue 13 Oct
Mini On/Off Push-Button Switch
SKU: AF-3870 | Brand: Adafruit
A compact push-button toggle switch — press once to turn on, press again to turn off. Often called a "flashlight switch" due to its common use in small torches, this latching switch is ideal as a power switch or mode ...
Delivered by Tue 13 Oct
Gravity: I2C BME280 Environmental Sensor (Temperature, Humidity, Barometer)
SKU: DF-SEN0236 | Brand: DFRobot
BME280 is an environmental sensor that integrates onboard temperature sensor, humidity sensor and barometer. The sensor is of high precision, multiple functions, and small size etc. It provides both SPI and I2C in...
Delivered by Thu 22 Oct
Resistor 1K Ohm 1/4 Watt PTH - 20 pack
SKU: SF-PRT-14492 | Brand: SparkFun
These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....
Delivered by Tue 13 Oct
Speaker - 3inch / 76.2mm Diameter - 4 Ohm 3 Watt
SKU: AF-1314 | Brand: Adafruit
A 3-inch (76.2 mm) speaker cone with 4 Ω impedance and 3 W power handling. Four mounting tabs spaced 60 mm apart make it easy to secure in enclosures or project housings. Pairs well with Class D amplifier boards for c...
Delivered by Tue 13 Oct
Little Bird Carry Bag
SKU: LB-BAG | Brand: Little Bird
A reusable carry bag that folds up into the shape of a bird — compact enough to clip onto your keys or a larger bag so you always have it when you need it. A handy, eco-friendly alternative to single-use plastic bags....
Delivered by Tue 13 Oct
Gravity: Analog TDS Sensor/Meter for Arduino
SKU: DF-SEN0244 | Brand: DFRobot
The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the l...
Delivered by Thu 22 Oct
Adafruit LED Sequins - Pack of 5 - Warm White
SKU: AF-1758 | Brand: Adafruit
Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...
Delivered by Wed 4 Nov
Adafruit NeoPixel Ring - RGB LED w/ Integrated Drivers - 12 pixel
SKU: AF-1643 | Brand: Adafruit
Round and round they go! 12 ultra-bright smart RGB NeoPixels are arranged in a compact circle with a 37 mm (1.5″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-b...
Delivered by Tue 13 Oct
FTDI Serial TTL-232 USB Cable
SKU: AF-70 | Brand: Adafruit
Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. This is a USB to TTL serial cable, with a FTDI FT232RL...
Delivered by Tue 13 Oct
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB
SKU: AF-2342 | Brand: Adafruit
The Adafruit Audio FX Mini Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger ...
Delivered by Tue 13 Oct
Pan/Tilt Bracket Kit (Single Attachment)
SKU: SF-ROB-14391 | Brand: SparkFun
This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand applications. This particular bracket kit is the same one we use in our SparkFun Raspberry P...
Delivered by Tue 13 Oct
Momentary Pushbutton Switch - 12mm Square
SKU: SF-COM-09190 | Brand: SparkFun
This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input on a PCB or a good, big reset button o...
Delivered by Tue 13 Oct
LilyPad Button Board
SKU: SF-DEV-08776 | Brand: SparkFun
We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...
Delivered by Tue 13 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
