Brands and Manufacturers

SKU: AF-4947 | Brand: Adafruit

The Adafruit 2.13" Tri-Colour eInk Display brings electronic paper technology to your microcontroller projects. Featuring a 250×122 pixel display with black, red, and white ink, this breakout delivers high-contrast, d...

SKU: SF-WRL-17506 | Brand: SparkFun

The SparkFun expLoRaBLE Thing Plus is a Feather-footprint development board with the NM180100 system in package (SiP), from Northern Mechatronics. Thanks to the NM180100, as well as the Ambiq Apollo3 microcontrolle...

SKU: AF-4953 | Brand: Adafruit

A 10-pack of Kailh Black linear mechanical key switches, compatible with Cherry MX mounts. Linear switches provide a smooth, consistent keystroke without a tactile bump or audible click. The Black variant has a slight...

SKU: SF-WRL-16984 | Brand: SparkFun

Featuring the nRF52840 SoC from Nordic Semiconductor, the SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver in the MicroMod form-factor with the ...

SKU: DF-DFR0119-O | Brand: DFRobot

This compact stereo amplifier module from DFRobot features a 2.54mm pin pitch for easy breadboard and embedded use. It delivers 3W per channel with left and right stereo output, and includes a shutdown (SHDN) pin for ...

SKU: AF-4892 | Brand: Adafruit

These incredibly small and slim surface-mount NeoPixel LEDs are an easy way to add a lot of very tiny (but bright!) colorful baguette diamond LEDs to your project. They are just 3.2mm x 1.0mm x 1.48mm and ca...

SKU: KI-5638_2 | Brand: Kitronik

The Line Following Buggy with :MOVE line following board for the BBC microbit is the newest version of our very popular line following buggy. It features the :MOVE line following board and has fewer parts. Not only do...

SKU: DF-DFR0724 | Brand: DFRobot

Portenta H7 simultaneously runs high level code along with real time tasks. The design includes two processors that can run tasks in parallel. For example, is possible to execute Arduino compiled code along with Micro...

SKU: DF-DFR0684 | Brand: DFRobot

An industrial-grade RS485 expansion shield designed specifically for the LattePanda V1. This shield adds a reliable, isolated RS485 interface (via OPEN4) with comprehensive protection including signal isolation, power...

SKU: AF-4860 | Brand: Adafruit

The Adafruit Prop-Maker Starter Kit contains the electronics you need to build a 3D-printed NeoPixel lightsaber with motion-activated lighting and full sound effects. The kit pairs the Feather M4 Express with the Prop...

SKU: SF-SEN-15137 | Brand: SparkFun

The JeVois Camera is a low cost, all-in-one 1.3MP machine vision camera. With an on board quad core CPU and MicroSD slot, all computer vision algorithms run on the device itself and can interface to computers or other...

SKU: DF-FIT0729 | Brand: DFRobot

This 8-megapixel USB camera module is built around the Sony IMX179 CMOS sensor, delivering up to 3264×2448 resolution with autofocus. It's driver-free via the UVC protocol — just plug in and start capturing HD photos ...

SKU: DF-DFR0678 | Brand: DFRobot

This 7" TFT touchscreen connects directly to the Raspberry Pi via the DSI display interface, delivering 800×480 resolution with capacitive 5-point touch input. The display is powered entirely from the Raspberry Pi — n...

SKU: SF-DEV-17514 | Brand: SparkFun

The Alchitry Au+ is the upgraded version of the Alchitry Au, featuring the more powerful Xilinx Artix 7 XC7A100T FPGA with over 100,000 logic cells — nearly 3× the capacity of the standard Au. It also includes 256MB o...

SKU: SF-DEV-17526 | Brand: SparkFun

The Alchitry Ft is a high-speed Element board that adds a USB 3.0 interface to your Alchitry FPGA stack. It provides up to 200MB/s data transfer via its USB-C connector, enabling high-bandwidth communication between y...

SKU: AF-4840 | Brand: Adafruit

Here at Adafruit we love discovering new and exotic glowing things. Like moths to the flame, we were intrigued by these 'chip on board' ultra-flexible white LED Strips with 480 SMT LEDs per meter, soldered side-by-sid...

SKU: SF-CAB-17261 | Brand: SparkFun

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from silicon making it more flexible than our&nbsp...

SKU: SF-PRT-17599 | Brand: SparkFun

This hardware kit consists of 4 each of M2 style nylon hex nuts and screws. It is designed for use with the Leopard Imaging Camera, but can be used for other mountings as well.This hardware set is identical to what is...

SKU: AF-4785 | Brand: Adafruit

A 3-pack of universal proto-board PCBs measuring 40 × 60 mm, made from sturdy FR4 fibreglass with a black silkscreen on both sides featuring row and column markings. Each board has 280 through-holes (14 columns × 20 r...

SKU: EC-WHC0011RF | Brand: Elecrow

The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internall...