Brands and Manufacturers

SKU: SF-DEV-16829 | Brand: SparkFun

The SparkFun MicroMod Data Logging Board offers a highly customizable, low-power data logging platform using the MicroMod system allowing you to choose your own Processor to pair with the Carrier Board. The Data Lo...

SKU: SF-KIT-16549 | Brand: SparkFun

The great thing about open source is that while SparkFun has designed our own MicroMod carrier boards, that does not stop you from creating your very own MicroMod carrier board. The MicroMod DIY Carrier Kit includes f...

SKU: SF-TOL-16886 | Brand: SparkFun

Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V, 2.4A USB car charger. These car chargers have a standard USB 'A' connector fo...

SKU: SF-COM-17263 | Brand: SparkFun

This is a "deluxe" joystick knob very similar to the thumb pads on PlayStation controllers. We specifically carry this knob to pair with our 16mm Deluxe Thumb Joystick.

SKU: SF-COM-16273 | Brand: SparkFun

A 16 mm deluxe thumb joystick similar to the analogue sticks found in PlayStation controllers. Two 10K potentiometers provide analogue position data for the full range of motion on both axes, and a built-in select but...

SKU: DF-SEN0366 | Brand: DFRobot

This is a cost-effective IR laser distance sensor that features high accuracy, long-distance detection, visible IR laser, and small FOV. It offers the measuring ranges 0.05~80m for indoor use and 0.05~50m outdoor. Wit...

SKU: DF-SER0049 | Brand: DFRobot

A 9g micro servo with 180° rotation and a built-in clutch mechanism that protects the servo from damage when external forces are applied. If the servo angle is changed by an external force during operation, the clutch...

SKU: DF-FIT0715 | Brand: DFRobot

Rigid Armor protective case with super heat dissipation!This new aluminum case is capable of providing a better cooling solution for your Raspberry Pi 4B. Meanwhile, it can be access to all ports and slots of Pi 4B mo...

SKU: EC-CIA51002C | Brand: Elecrow

W5100 is a multifunctional Monolithic network interface chip, internal integrate a 10/100 Ethernet controller , it apply to a embedded system which is High-Integrate, high-stability, high-performance but low-cost. By ...

SKU: DF-FIT0676 | Brand: DFRobot

A WS2812B addressable RGB LED ring lamp composed of 93 LEDs arranged in 6 concentric rings. Each ring can be controlled independently or cascaded together, and individual rings can be cut apart and recombined into cus...

SKU: AF-4762 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! These Conductive Nylon Squares go great with our other interesting materials, such as copper tape,...

SKU: DF-FIT0668 | Brand: DFRobot

A versatile 2-in-1 USB cable with both USB-C and Micro USB connectors on one end, so you can charge and program devices with either interface using a single cable. The flat cable design resists tangling, and the inclu...

SKU: AF-4763 | Brand: Adafruit

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order...

SKU: AF-4735 | Brand: Adafruit

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Sili...

SKU: AF-4733 | Brand: Adafruit

Ultra-fine 36 AWG stranded wire with Teflon insulation, supplied on a 10-metre spool. At just 0.28 mm outer diameter, this wire is exceptionally thin and flexible — ideal for wearable electronics, fine-pitch assemblie...

SKU: LB-LS2193 | Brand: Little Bird

A clip-on LED desk light with adjustable brightness and colour temperature, ideal for illuminating soldering work, electronics projects, or general desk tasks. The centre hole lets you look through the light ring whil...

SKU: AF-4662 | Brand: Adafruit

These T-shaped barbed connectors allow you to split or combine silicone tubing runs into three-way junctions. Each port has an outer diameter of approximately 4 mm, designed to fit snugly with 3 mm ID silicone tubing ...

SKU: SF-SEN-16760 | Brand: SparkFun

The High Quality Camera Module is a camera sensor designed to accept CS-mount lenses and, with the supplied adapter, C-mount lenses for use with the Raspberry Pi single board computer line. It offers higher resolution...

SKU: SF-SEN-16762 | Brand: SparkFun

This is the 6mm CS-mount wide angle lens from CGL Electronics Co. Ltd. for use with the Raspberry Pi HQ Camera Module. The lens produces a 3MP picture in a 0.5in image format and is easily interchangeable using the th...

SKU: AF-4689 | Brand: Adafruit

Peep this NeoPixel RGBW Neon-like LED Flex Strip with Silicone Tubing! OK its a bit of a mouthful but check out the beautiful pics! It has a diffused look like neon, but without the need for expensive transformers, gl...