All Products

SKU: SF-PRT-10651 | Brand: SparkFun

These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections organized. Simply press the connector onto your ribbon cable, no soldering required, which...

SKU: PL-1930 | Brand: Pololu

A pack of 100 female crimp pins designed for use with 0.1" (2.54mm) pitch crimp connector housings. Crimp these pins onto 22–28 AWG wires and snap them into housings to create custom cables compatible with standard he...

SKU: DF-SER0039 | Brand: DFRobot

A compact 9g micro servo with metal gears, delivering 1.8 kgf·cm of torque at 4.8V. The metal gear train provides significantly better durability than plastic versions, especially in robotics applications where the se...

SKU: AF-67 | Brand: Adafruit

A 9V battery holder with a built-in on/off switch and a pre-attached 5.5mm/2.1mm centre-positive barrel plug. Ready to use out of the box — snap in a 9V battery, plug into your Arduino or other development board, and ...

SKU: AF-1938 | Brand: Adafruit

LOLwut? NeoPixels in 5mm through-hole variety? Oh yes, we haz them! If you like NeoPixel strips you'll luv these 5mm diffused through-hole NeoPixels. All the single-pin-controlling-hundreds-of-LEDs goodness in a...

SKU: AF-1930 | Brand: Adafruit

A 50 g spool of lead-free SAC305 solder wire in a fine 0.5 mm (0.02″) diameter — ideal for both through-hole and SMT soldering work. The no-clean rosin core flux makes for clean joints without the need for post-solder...

SKU: AF-1979 | Brand: Adafruit

This extra-tall, extra-long 2x20 female stacking header lets you add multiple plates, breakouts and other boards to a Raspberry Pi with a 40-pin GPIO header.The female header section is made taller to help an attached...

SKU: AF-878 | Brand: Adafruit

The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in red makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so you...

SKU: SF-PRT-14493 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limite...

SKU: AF-1904 | Brand: Adafruit

The Adafruit Micro Lipo with MicroUSB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Micro USB cable to a USB power source and connect your batt...

SKU: PR-PIM213 | Brand: Little Bird

The Pimoroni Automation HAT is a versatile home automation and monitoring controller for the Raspberry Pi. It provides relays, analogue inputs, buffered digital inputs, and powered outputs — all 24 V tolerant — with i...

SKU: LB-LS1719 | Brand: Little Bird

A Mini HDMI to VGA adapter for connecting the Raspberry Pi Zero or Zero W to VGA monitors, projectors, and TVs. Converts the digital Mini HDMI signal to analogue VGA, supporting resolutions up to 1080p. Key Features ...

SKU: DF-SEN0638 | Brand: DFRobot

HUSKYLENS 2 is a powerful AI vision sensor with a 1.6GHz dual-core processor and 6 TOPS AI accelerator. With 20+ built-in AI models and the ability to train and deploy custom YOLO models, it brings advanced computer v...

SKU: WS-31436 | Brand: Waveshare

Expand your Raspberry Pi 5 with high-speed storage and extra USB connectivity using this PCIe HAT+ board. It connects to the Pi 5’s 16PIN PCIe interface with the included cable, adding an M.2 NVMe slot plus four USB 3...

SKU: RP-SC1677 | Brand: Raspberry Pi Ltd

Many of our favourite Raspberry Pi applications, from garden webcams to industrial controllers, involve putting our products in out-of-the-way locations, where they act as a bridge between the network and the physical...

SKU: DF-DFR0876 | Brand: DFRobot

The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a se...

SKU: LB-1601217817192 | Brand: Little Bird

This HDMI splitter cable takes a single HDMI source and mirrors it to two displays simultaneously. It features gold-plated connectors for reliable signal transfer and foil shielding to reduce electromagnetic and radio...

SKU: LB-LS0112-60 | Brand: Little Bird

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled ...

SKU: WS-27541 | Brand: Waveshare

  PCIe To Gigabit Ethernet And USB 3.2 Gen1 HAT For Raspberry Pi 5, 3x USB 3.2 Gen1, 1x Gigabit Ethernet, Driver-Free, Plug And Play, Raspberry Pi 5 PCIe HATExtends 1x Gigabit Ethernet Port Equipped With RTL8153...

SKU: AF-5938 | Brand: Adafruit

A breakaway strip of 36 press-fit male pin headers at standard 2.54mm (0.1") pitch. These headers can be attached to PCBs without soldering — press them firmly into place using pliers for a friction-fit connection tha...