All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Grove to STEMMA QT / Qwiic / JST SH Cable - 100mm long
SKU: AF-4528 | Brand: Adafruit
A 100 mm adapter cable that bridges the gap between Grove and STEMMA QT / Qwiic ecosystems. One end features a Grove connector, the other a JST SH (STEMMA QT / Qwiic compatible) connector — making it easy to mix and m...
Delivered by Thu 2 Jul
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
SKU: AF-1063 | Brand: Adafruit
A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...
Delivered by Fri 12 Jun
EasyDriver Stepper Motor
SKU: LB-LR0149 | Brand: Little Bird
The EasyDriver is a simple stepper motor driver board based on the Allegro A3967 IC. It accepts a digital step/direction input (3.3 V or 5 V logic) and drives bi-polar stepper motors (4, 6, or 8 wire) at any voltage w...
Delivered by Fri 12 Jun
Grove Cable Pigtail - 2mm pitch 100mm long
SKU: AF-5244 | Brand: Adafruit
A 100 mm pigtail cable with a Seeed Grove connector on one end and four bare wires on the other, for connecting Grove-compatible boards and breakouts to custom wiring. Specifications Connector – Grove (2 mm pitch),...
Delivered by Thu 2 Jul
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc
SKU: AF-5648 | Brand: Adafruit
The Adafruit STEMMA MOSFET Driver makes it safe and simple to control motors, solenoids, high-power LEDs, and other current-hungry loads from any microcontroller. Instead of wiring up a transistor and flyback diode on...
Delivered by Fri 12 Jun
Voice Recorder Module-Breakout
SKU: DF-DFR0745 | Brand: DFRobot
Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. Y...
Delivered by Fri 12 Jun
SparkFun Electret Microphone Breakout
SKU: SF-BOB-12758 | Brand: SparkFun
The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up...
Delivered by Fri 12 Jun
Adafruit Silicon MEMS Microphone Breakout - SPW2430
SKU: AF-2716 | Brand: Adafruit
The Adafruit SPW2430 Silicon MEMS Microphone Breakout is a compact, low-cost microphone module that detects sound and converts it to an analog voltage — no external bias resistor or amplifier needed. With a frequency ...
Delivered by Fri 12 Jun
Motoron M3S256 Triple Motor Controller Shield for Arduino (Connectors Soldered)
SKU: PL-5030 | Brand: Pololu
The Motoron M3S256 Triple Motor Controller Shield for Arduino makes it easy to control DC motors from an Arduino or Arduino-compatible board through an I²C interface. Each module can independently control up to three ...
Delivered by Fri 12 Jun
Adafruit WINC1500 WiFi Shield with PCB Antenna
SKU: AF-3653 | Brand: Adafruit
Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption w...
Delivered by Fri 12 Jun
Adafruit WINC1500 WiFi Shield with uFL Connector
SKU: AF-3654 | Brand: Adafruit
Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption w...
Delivered by Thu 2 Jul
USB To Uart 5V/3V3
SKU: SS-103990049 | Brand: Seeed Studio
USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interfa...
Delivered by Fri 12 Jun
Arduino Compatible Long Range LoRa Shield
SKU: TB-XC4392 | Brand: Little Bird
The Arduino Compatible Long Range LoRa Shield turns your Arduino into a LoRa wireless node capable of transmitting and receiving data over several kilometres — without the need for a GSM network. Built around the Semt...
Delivered by Fri 12 Jun
Bluno Bee - Turn Arduino to Bluetooth 4.0 (BLE) Board
SKU: DF-TEL0073 | Brand: DFRobot
Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket. Bluno Bee is designed to have voltage regulator which supports bot...
Delivered by Tue 23 Jun
SparkFun Qwiic 5V Boost - AP3012K - SparkFun Electronics
SKU: SF-PRT-28203 | Brand: SparkFun
The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V, available on the PTH...
Delivered by Tue 23 Jun
Adafruit DAC6578 Breakout - 8 x Channel 10-bit I2C DAC
SKU: AF-6258 | Brand: Adafruit
The Adafruit DAC6578 Breakout provides eight independent 10-bit digital-to-analogue converters in a single package, all controllable over I2C. Set precise output voltages on up to eight channels simultaneously, making...
Delivered by Thu 2 Jul
Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
SKU: AF-6331 | Brand: Adafruit
The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...
Delivered by Thu 2 Jul
SparkFun ESLOV to Qwiic Bridge
SKU: SF-BOB-23589 | Brand: SparkFun
The SparkFun ESLOV to Qwiic Bridge lets you quickly and easily connect Qwiic breakouts to Arduino boards with an ESLOV connector for I2C communication. ESLOV and Qwiic allow for simple assembly of I2C circuits without...
Delivered by Tue 23 Jun
SparkFun CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic)
SKU: SF-SEN-22395 | Brand: SparkFun
The SparkFun SCD40 breakout board measures CO₂ concentration, humidity, and temperature using Sensirion's PASens photoacoustic measurement technology. The sensor detects CO₂ from 0 to 40,000 ppm with high accuracy ove...
Delivered by Tue 23 Jun
434Mhz Serial RF Module HC-11 (1-40M)
SKU: EC-WHC0011RF | Brand: Elecrow
The HC-11 is a low-cost, high-performance FSK transceiver module operating at 434 MHz, designed for transparent wireless serial communication. With a UART/TTL interface, it handles all RF protocol processing internall...
Delivered by Fri 26 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
