All Products

SKU: RP-PICO-ELEC | Brand: Raspberry Pi Ltd

If you're looking for a Raspberry Pi Pico Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico.The components of this Pico Electronics Kit enable you to create el...

SKU: LB-LR0064 | Brand: Little Bird

The KnockOffDuino® Uno is functionally the same as the Arduino Uno R3 at a fraction of the cost. It is the Arduino for beginners and 100% Uno compatible, however it uses the CH340G usb to serial chip instead of the...

SKU: LB-BK-LR0282 | Brand: Little Bird

Description This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of a...

SKU: LB-LR0214-16 | Brand: Little Bird

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (i...

SKU: DF-DFR0299 | Brand: DFRobot

Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module player with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speake...

SKU: LB-LS2696 | Brand: Little Bird

A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ...

SKU: LB-LS2921 | Brand: Little Bird

Comes as a standard 10K ohm linear potentiometer with 0.1" spacing it works great for  prototyping. It has a nice feel, tweaking it is quite satisfying.These are used on the crack the code shield.1 x Potentiomete...

SKU: LB-24-LIGHT | Brand: Little Bird

Light-dependent resistors are electronic components whose resistance changes with light intensity. They are also called LDRs, photoresistors, or photoconductors.   It has four pins:3.3V  : While 'VCC'...

SKU: LB-LR0282 | Brand: Little Bird

This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ. ...

SKU: EC-AAK90039K | Brand: Elecrow

The Arduino Automatic Smart Plant Watering Kit 2.1 is a complete system for monitoring and watering up to four plants automatically. Built around an integrated Arduino Leonardo mainboard, it uses capacitive soil moist...

SKU: LB-FLAME-LIGHT | Brand: Little Bird

This IR flame sensor module detects flames and infrared light sources in the 760–1,100 nm wavelength range. With a detection angle of approximately 60° and a test range of up to 80 cm (depending on flame size), it pro...

SKU: SF-SEN-10988 | Brand: SparkFun

This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to t...

SKU: AF-1361 | Brand: Adafruit

This conductive material, also known as Velostat or Linqstat, is a handy addition to a wearable and sensor hacking toolkit. It is pressure-sensitive, so squeezing the sheet reduces its resistance, making it useful for...

SKU: LB-LS6232 | Brand: Little Bird

For better audio quality when playing music, consider using a USB audio card with your Raspberry Pi. This upgrade can greatly enhance sound quality and volume since the on-board audio is produced through a minimally f...

SKU: KI-5647 | Brand: Kitronik

The Prong Soil Moisture Sensor mounts directly onto a BBC micro:bit to monitor soil moisture levels. Two conductive tines are inserted into the soil — any moisture conducts an analogue voltage that the micro:bit reads...

SKU: LB-LR0289 | Brand: Little Bird

With the passive buzzer you can control the volume by PWM. A passive buzzer requires an AC signal to make a sound. It is like an electromagnetic speaker, where a changing input signal produces the sound, rather than...

SKU: LB-LS2299 | Brand: Little Bird

A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...

SKU: EF-EF08197 | Brand: ElecFreaks

The ElecFreaks Smart Home Kit is a micro:bit project kit for building interactive smart home models. It includes sensors, actuators, and cardboard building materials to create miniature scenes — a windowsill, wardrobe...

SKU: LB-LR0065 | Brand: Little Bird

The KnockOffDuino MEGA is a budget-friendly, fully Arduino MEGA 2560 R3-compatible development board. It features the same ATmega2560 microcontroller, pinout, and form factor as the original, making it a cost-effectiv...

SKU: WS-20167 | Brand: Waveshare

Features At A Glance The Pico-Audio is an audio expansion module designed for Raspberry Pi Pico, which incorporates PCM5101A low power stereo decoder, and uses I2S bus for transmitting audio signal. It supports wi...