All Products

SKU: SF-GPS-16329 | Brand: SparkFun

The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...

SKU: SF-GPS-15733 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...

SKU: SF-DEV-16790 | Brand: SparkFun

The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to st...

SKU: SF-COM-16346 | Brand: SparkFun

The WS2812B (or "NeoPixel") may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don't need 10, maybe you need 50! If you are t...

SKU: SF-PRT-16662 | Brand: SparkFun

A 2-pack of premium 6" male-to-male jumper wires in red and black — handy for power and ground connections where colour coding matters. Stranded core for flexibility with solid male pins on both ends for a reliable fi...

SKU: SF-PRT-16538 | Brand: SparkFun

Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...

SKU: AF-4441 | Brand: Adafruit

The Garmin LIDAR-Lite V4 LED is a compact, low-power optical distance sensor that measures up to 10 metres using lensed LED light (not a laser, despite the name). Drawing only 85 mA during acquisition with measurement...

SKU: SF-WRL-15836 | Brand: SparkFun

The SparkFun Pro RF is a LoRa®-enabled wireless board that marries a SAMD21 and a long-range RFM95W to make a compact and easy-to-use IoT Arduino board. With its fast MCU and excellent point to point data transmission...

SKU: AF-4438 | Brand: Adafruit

The Adafruit LSM6DSOX is a high-quality 6 Degree of Freedom (6-DoF) IMU from ST, combining a triple-axis accelerometer and triple-axis gyroscope on a single chip. Beyond basic motion sensing, it includes built-in tap ...

SKU: DF-FIT0658 | Brand: DFRobot

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching freque...

SKU: SF-DEV-16260 | Brand: SparkFun

The Leopard Imaging Camera is a wide-angle camera module designed specifically for the NVIDIA Jetson Nano Developer Kit. With a 136° field of view, Sony IMX219 8.08 MP colour sensor, and CSI-2 MIPI 2-lane interface, i...

SKU: EC-RPA03024P | Brand: Elecrow

This smart fan and power expansion board are designed for DIY makers, especially for Raspberry Pi lover, it is compatible with Raspberry Pi 3/ 2B/ B+. Built-in temperature sensor, with active cooling fan, you can c...

SKU: DF-DFR0641 | Brand: DFRobot

This precise RTC adopts DS3231M chip, which integrates MEMS resonator and temperature compensator. Compared to quartz crystal clock, the real-time clock reduces the risk of mechanical failure. Therefore, it can be use...

SKU: SF-DEV-16129 | Brand: SparkFun

The SparkFun controller:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional controller system. Designed in a similar form factor to the cl...

SKU: SF-KIT-15948 | Brand: SparkFun

Do you see what we see? With the FLIR Radiometric Lepton® Dev Kit v2 you will be able to bring FLIR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an ea...

SKU: DF-FIT0632 | Brand: DFRobot

Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full po...

SKU: DF-SEN0329 | Brand: DFRobot

The TF03 is an industrial-grade ToF (Time-of-Flight) LiDAR sensor with a detection range of up to 180 m at 90% reflectivity. Using pulsed laser ranging at 905 nm, it delivers ±10 cm accuracy with a 0.1 m minimum blind...

SKU: DF-FIT0633 | Brand: DFRobot

Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and allowing full power...

SKU: EF-EF01003 | Brand: ElecFreaks

The Freaduino MEGA2560 is an Arduino MEGA 2560 compatible development board from ElecFreaks. It inherits the same pin layout, screw holes, and dimensions as the official Arduino MEGA 2560, so all existing shields, lib...

SKU: EF-EF04096 | Brand: ElecFreaks

Octopus 3V laser sensor is the laser emission electric brick in our Octopus series, the basic design is from the Octopus electric bricks and the setting of its outlook, the PCB fixing hole and the connectors are the s...