All Products

SKU: AF-4536 | Brand: Adafruit

A simple adapter that converts a standard 2.1 mm DC barrel jack into a USB-C plug, letting you power USB-C devices from common 5 V barrel-jack wall adapters. Plug it onto the end of your existing power supply and conn...

SKU: AF-4469 | Brand: Adafruit

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcont...

SKU: SF-PRT-16764 | Brand: SparkFun

This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs th...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: EC-MCS01110 | Brand: Elecrow

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconne...

SKU: EC-ASC7503RTC | Brand: Elecrow

The RTC Data Logger Shield adds SD card storage and a real-time clock to your Arduino, making it straightforward to log timestamped sensor data. It supports SD, SDHC, and microSD TF cards via an onboard toggle switch ...

SKU: SF-CAB-15796 | Brand: SparkFun

This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 to a suitable monitor or TV. Heck, you can hook up anything you want with it! Micro HDMI is less common of a ...

SKU: AF-4230 | Brand: Adafruit

A 24-pin 0.5mm pitch FPC extension cable, 25cm long, designed for mounting eInk and ePaper displays at a distance from the driver board. Use this cable when you need to position your display remotely — for example, in...

SKU: PI-PIM498 | Brand: Pimoroni

The Unicorn HAT Mini is a compact 17×7 RGB LED matrix for Raspberry Pi, featuring 119 individually controllable LEDs and four tactile buttons. Simply pop it onto any 40-pin Raspberry Pi — no soldering required — and u...

SKU: SF-SEN-16466 | Brand: SparkFun

A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...

SKU: LB-13-PHILLIPS | Brand: Little Bird

 Precision Magnetic Screwdriver 1.3 Phillips.  These handy little screwdrivers can be used with our E-Textile boards to add and remove the M1.4 screws to access the coin cell battery.These are also great for...

SKU: PR-PIM408 | Brand: Little Bird

Inky wHAT is a 4.2" e-paper display HAT for Raspberry Pi, capable of showing red, black, and white. The EPD display is crisp and readable in bright sunlight, making it perfect for information displays that don't need ...

SKU: LB-COM-2018 | Brand: Little Bird

This is the Components Kit for CTC (Crack the Code). The Crack the Code unit of work addresses 25 hours of the Digital Technologies context in the new Technology Mandatory syllabus in NSW.Designed for educational purp...

SKU: AF-4403 | Brand: Adafruit

Analog panel meters are arguably not as blingy or flashy as LEDs, but their simplicity adds a touch of elegance and makes them easier to read quickly.This Small -15V to +15V Panel Meter is about handheld-size, wi...

SKU: AF-4445 | Brand: Adafruit

A compact 2.8" × 1.2" enclosed mono speaker delivering clear audio output at 3W and 4 ohm impedance. The sealed enclosure provides improved sound quality and volume compared to bare speaker drivers of a similar size. ...

SKU: SF-BOB-15931 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all of those ...

SKU: AF-4472 | Brand: Adafruit

This USB Type A to Type C cable provides a simple way to connect modern USB-C devices to computers, hubs, and chargers that use the standard USB Type A (rectangular) port. At just 6 inches long, it's perfect for short...

SKU: AF-4405 | Brand: Adafruit

This anti-static ESD rework mat provides a safe working surface for electronic repair and assembly, especially when handling ESD-sensitive components. The high-resistance coating (tens of megaohms) dissipates static c...

SKU: KI-5672 | Brand: Kitronik

The Kitronik ZIP Halo HD for micro:bit is the ultimate micro:bit interface. 60 full-colour ZIP LEDs, Pins 1 & 2 broken out, MEMs mic, Piezo sounder, RTC & more!The Kitronik Halo HD board for the BBC micro:bit incorpor...