Actuators

SKU: LB-LR0259 | Brand: Little Bird

This high quality micro-sized servo is an affordable and simple to use servo for all your mechatronic needs. This servo can operate from 3.0v-7.2v and delivering 1.6kg/cm maximum torque at 0.10 sec/60° The micro se...

SKU: LB-LS6502 | Brand: Little Bird

The MG996 Servo is a robust, high-torque servo designed for demanding applications. An upgrade to the popular MG995, this servo offers improved precision and performance with a redesigned PCB and IC control system. Fe...

SKU: AF-711 | Brand: Adafruit

A standard 130-size DC hobby motor with a wider operating range than typical toy motors: 4.5–9V DC instead of the usual 1.5–4.5V. This makes it ideal for Arduino and motor shield projects where 5V or 9V is readily ava...

SKU: DF-FIT0800 | Brand: DFRobot

A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and eas...

SKU: LB-LS2977 | Brand: Little Bird

Specification:Model: Mini 130 Vibration MotorMotor size: 25*20mmMotor height: 15.3mmVoltage range: DC 3V-6VRated voltage: DC 3.7VRated current: 0.8AWeight: 26gApplication: It is a Strong Vibration Motor. Packa...

SKU: LB-SERVO-3003 | Brand: Little Bird

High impact plastic is designed to withstand minor crashes and the effects of model fuelThrough-the-hole Circuit Board Plating - Eliminates the need for wires or leadsHeavy Duty Output Shaft - Designed not to break...

SKU: DF-FIT0484 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: DF-DFR0332 | Brand: DFRobot

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...

SKU: DF-FIT0495-A | Brand: DFRobot

A compact metal DC geared motor with a 478:1 reduction ratio, delivering high torque in a small form factor. Rated at 6V with a no-load speed of 15 RPM and a stall torque of 10 kg·cm, it's well-suited for robotics, pa...

SKU: DF-SER0060 | Brand: DFRobot

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mech...

SKU: DF-FIT0520 | Brand: DFRobot

A 6V brushed DC motor with a 20:1 metal gearbox and an integrated quadrature encoder. The encoder provides 11 counts per revolution of the motor shaft, corresponding to 224.4 counts per revolution of the gearbox outpu...

SKU: DF-FIT0486 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: EF-EF10159 | Brand: ElecFreaks

ELECFREAKS Mechanical Catch (Use With Cutebot) is a gripper that uses an SG92R servo as a power source. The servo uses a PWM signal to drive the gripper gear to rotate and control the gripper for clamping and releasin...

SKU: SF-ROB-09065 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-i...

SKU: DF-FIT0482 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: DF-DFR1114 | Brand: DFRobot

The Gravity N20 is a compact all-metal gear motor with an integrated drive chip that simplifies motor control to a single PWM signal. Operating on 3–6 V, it uses a PPM servo-style control method — forward, stop, and r...

SKU: WS-24702 | Brand: Waveshare

The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding rob...

SKU: PI-COM0808 | Brand: Pimoroni

A miniature brushed DC motor with a 20:1 metal gearbox and an extended back shaft for mounting optical encoders. All micro metal gearmotors share the same physical dimensions, so different gear ratios can be easily sw...

SKU: DF-FIT0487 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses can reach up to 7*2*380...

SKU: DF-SER0020 | Brand: DFRobot

The DSS-P05 is a standard-size servo with up to 4.2 kg·cm of torque at 6V, suitable for robot heads, arms, biped robots, and other projects requiring reliable 180° rotation. Specifications Voltage – 4.8–6.0V Torqu...