All Products

SKU: PI-IQA002

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instruments TAS5756m chipset, it delivers full-HD audio quality with no soldering requir...

SKU: AF-2711 · MPN: 2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi  with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi Mini proto area for...

SKU: AF-160 · MPN: 160

The PS1240 is a compact piezo buzzer for generating beeps, tones, and alerts in electronic projects. Drive it with a 3–30 V peak-to-peak square wave from a timer or microcontroller. It produces its loudest output around 4 kHz but works well across the 2–10 kHz range. For extra volume, use differ...

SKU: AF-4931 · MPN: 4931

This thin silvery ribbon is an interesting sensor. It's made of 2mm wide by 600mm long piezoelectric film sandwich. Piezo film can be used to detect motion or vibration - when shifted around or touched, it creates a small current pulse across the terminals. If a 1 Mega-ohm resistor is placed...

SKU: SF-SEN-10293

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detection projects. Connect the output to an analog input on your Arduino or other m...

SKU: SF-SEN-09196

This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage down to ADC levels. Can also be used for impact...

SKU: SF-SEN-09197

A flexible piezo vibration sensor from Measurement Specialties, commonly used for detecting flex, touch, vibration, and shock. The PVDF polymer film generates a small AC voltage (up to ±90 V) when it moves, which can be brought down to ADC-readable levels with a simple resistor divider. This vers...

SKU: SF-SEN-09198

The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back...

SKU: SF-SEN-09199

The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user. A small AC and large voltage (up to +/-90V) is created when the film moves back...

SKU: AF-2718 · MPN: 2718

The 7” Touchscreen Display for Raspberry Pi gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects! The 800x480 display connects via an adapter board which handles power and signal conversion. Only two connections to the Pi...

SKU: AF-3446 · MPN: 3446

The first 'official' Pi Zero case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own classic Pi Zero case for a little while now, the Pi Foundation celebrates the release of the Pi Zero W with this impressive, well-designed effort that is d...

SKU: PR-PIM013

Add colourful, programmable lighting to your Raspberry Pi with this compact add-on board featuring 18 individually controllable LEDs. It is designed to sit neatly on the Raspberry Pi GPIO header and even fits inside a Pibow case.PiGlow works with all models of Raspberry Pi, including the B+. It i...

SKU: AF-3015 · MPN: 3015

This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects like the PiGRRL 2 but it's basically everything-you-need to make your very own DIY gaming project with GPIO input We've dramatically cut the build time in half of the PiGRRL 2 pack&n...

SKU: AF-2934 · MPN: 2934

A custom gamepad PCB designed for the PiGRRL Zero project. This PCB dramatically cuts build time by providing a ready-made board — just solder in 6mm tactile switch buttons and wire up the header pins to your Pi Zero. Ideal for makers who already have the rest of the PiGRRL Zero parts or are doi...

SKU: AF-1003 · MPN: 1003

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). We think this would be especially useful when paired with our PWM driver breakou...

SKU: AF-2371 · MPN: 2371

This blue polycarbonate base is part of a mix-and-match case system for the Raspberry Pi Model A+. Pair it with any compatible snap-on lid to create your preferred colour combination — with seven base and seven lid colours available, there are 49 unique combinations to choose from. Designed by M...

SKU: AF-2363 · MPN: 2363

This clear polycarbonate base is designed for the Raspberry Pi Model A+. It's part of a modular snap-on case system — pair it with a separately available lid in your choice of colour to create a custom combination. Designed by Mike Doell, the case base is made from ultra-durable, high-gloss poly...

SKU: AF-2369 · MPN: 2369

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your room or o...

SKU: AF-2373 · MPN: 2373

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your room or o...

SKU: AF-2365 · MPN: 2365

Now that we have The Single Greatest Raspberry Pi Model A+ Case Ever - we decided to make it even better by adding COLORS!!!!!  Mix and match snap-on lids and bases to form your favorite combinations.  Buy one base then match different colored lids to your room...