All Products

SKU: SF-KIT-20673

The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data with the OpenLog Artemis and JEDI One. The SparkFun OpenLog Artemis (without IMU) is an open source data logger that comes preprogrammed to automatically log GPS / GNSS, s...

SKU: AF-5129

Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you can build your new robot friend while simultaneously trying out the new RP2040 chi...

SKU: AF-390 · MPN: 390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: AF-5449 · MPN: 5449

A USB Type-C Power Delivery (PD) cable that converts any PD-capable USB-C power adapter into a 9V DC barrel jack output at up to 5A. The built-in PD sink negotiation chip communicates with your adapter to request 9V output, while an EMARK chip enables full 5A high-current delivery as required by ...

SKU: SF-WRL-24243 · MPN: WRL-24243

It's time to supercharge your next project with the SparkFun RA6M5 Thing Plus! Clocking in at 200MHz, the RA6M5 is a high-performance microcontroller from Renesas that is perfect for real-time applications. This translates to smooth responsiveness, lightning-fast data processing, and the ability ...

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: DF-FIT0611

This compact rechargeable power module is designed for micro:bit-based Maqueen educational robots. It holds a single CR123A 3.6V lithium rechargeable battery and provides a tidy power solution for classroom robotics, STEM workshops and small mobile robot projects.A built-in lithium battery chargi...

SKU: SF-WRL-17381 · MPN: WRL-17381

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you attach a suitable external antenna for installations where a PCB antenna is not...

SKU: AF-3213 · MPN: 3213

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi developme...

SKU: AF-3046 · MPN: 3046

Feather is the flagship development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one'...

SKU: DF-DFR0852

A 4-channel USB buck converter module with built-in fast-charge protocol support. Accepts 6–32V input and provides adjustable 3–12V output (default 5V) across four independent USB ports, each capable of triggering fast-charge negotiation for compatible devices. The module automatically negotiate...

SKU: DF-FIT0870

A USB to DC boost converter cable that steps up 5 V from a USB power source to either 9 V or 12 V output, selectable via a built-in switch. A digital LED display shows the current output voltage. Simply plug the USB end into a power bank, USB charger, or any 5 V USB source to power 9 V or 12 V de...

SKU: AF-3406 · MPN: 3406

The Feather nRF52 Bluefruit LE is an all-in-one Bluetooth Low Energy development board built around the Nordic nRF52832. Unlike earlier Bluefruit Feathers that used a separate helper chip, the nRF52832 runs your application code and handles BLE directly — resulting in lower power consumption, low...

SKU: AF-3574 · MPN: 3574

The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a serial bootloader for command-line firmware flashing, and an on-board SWD debug...

SKU: DF-DFR0667

This Charger - MicroUSB is designed for single-cell 3.7V lithium battery. With its tiny body, you can easily integrate it into your applications. The charger adopts TP4056X lithium battery charging IC, which guarantees you quick and safe charging. Three output current modes can be easily switched...

SKU: SF-TOL-08639

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications Input – USB-A male plug Output – 5.5 × 2.1 mm barrel jack, centre positive V...

SKU: AF-4458 · MPN: 4458

If you're a DIY enthusiast who'd like to update your project's connection to the latest USB standard, here is a 10-pack of USB C jack connectors! They're sturdy metal with 4 through-hole mounting tabs and two positioning/shear-protection dots. It's really hard to rip these off a PCB. In an SMT li...

SKU: SF-WIG-12772

The SparkFun Logomatic v2 is a versatile serial and analogue data logger built around the NXP LPC2148 ARM7 microcontroller. It logs data to a microSD card in FAT32 format and appears as a USB mass storage device, so log files can be downloaded by simply dragging and dropping — no special software...

SKU: AF-659 · MPN: 659

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tutorials and projects. Check out dozens of FLORA tutorials on the Adafruit Learnin...

SKU: DF-FIT0887

A pack of two USB-A male to double alligator clip cables for supplying 5 V power from any USB port to breadboards, battery boards, and other devices without a dedicated power connector. Each cable has a red (+) and black (−) alligator clip on one end and a USB-A plug on the other. Key Features ...