All Products

SKU: SF-CAB-25629

Upgrade your connections with this durable USB-A to Micro-B 2.0 cable! This 1-meter (3.2-foot) cable boasts a flexible silicone coating for easy management and tangle resistance. Perfect for connecting your devices with convenience.If you're trying to wrap your head around the world of USB cables...

SKU: AF-390 · MPN: 390

This versatile LiIon/LiPo battery charger accepts power from three sources: a 6 V solar panel (via 2.1 mm DC jack), USB Mini-B, or a 5 V DC adapter. It features automatic charging current tracking that draws the maximum possible current from a solar panel in any light condition, providing near-MP...

SKU: SF-DEV-11814

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily for programming and communicating with 4D Systems displays and controllers. The 5...

SKU: SF-DEV-09718

The FTDI Cable is a USB-to-Serial (TTL level) converter that provides a simple way to connect TTL interface devices to USB. Built around the FTDI FT232RQ chip housed in the USB-A connector, this cable operates at 5V logic levels. The cable terminates in a 0.1" pitch, 6-pin connector commonly use...

SKU: AF-2769 · MPN: 2769

The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...

SKU: SF-CAB-09556

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate, so you can only connect the cable in one direction. The lea...

SKU: DF-DFR0010

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The arduino Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The arduino Nano automatically se...

SKU: AF-1905 · MPN: 1905

The Adafruit Mini Lipo with Mini-B USB Jack is a compact charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Plug in any Mini USB cable to a USB power source and connect your battery via the JST connector — two LEDs show status at a glance (red = charging, gr...

SKU: DF-FIT0057

USB 2.0 type A to mini USB 5-pin. This is a new, smaller connector for USB devices. mini USB connectors are about half the height of mini USB. mini USB is found on newer hand held devices like cell phones and portable media devices. This is the cable you need for the DFRduino Nano, arduino FI...

SKU: AF-3969 · MPN: 3969

Make your next custom USB cable a breeze with a USB Mini B Female Socket to 5-pin Terminal Block. If you need to connect to a device with a mini USB plug or maybe make your own USB OTG device or custom cable of sorts - this adapter will come in very handy: no soldering required! Just use...

SKU: AF-4105 · MPN: 4105

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version i...

SKU: AF-1389 · MPN: 1389

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a two-part snap plastic shell and a proper connector with easy-to-solder tabs.

SKU: AF-1826 · MPN: 1826

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mod...

SKU: EC-AP0500STK

AVRISP2.0 STK500 programmer help you download your codes into your controller or bootloader to your Arduino board, it communicates with PC via USB port, and it works with most of PC & notebook computers.Features It can support a wide range of ATMEL AVR microcontroller. It can works with AVR Studi...

SKU: AF-1827 · MPN: 1827

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector. It's a little more elegant because instead of snapping two pieces together the connector press-fits into the overmolding for a mode...

SKU: SF-DEV-09717

The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The VCC pins of this FTDI cable are configured to operate at 5V with 3.3V I/O. The FTDI cable is designed around an FT232RQ, which is housed in a USB A connector. The ...

SKU: AF-4473 · MPN: 4473

As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still totin' around a USB Type A hub, computer or laptop.USB C is the latest industry-standard connector for transmitting data and power. Like Light...

SKU: SF-PRT-00587

USB Type ‘Mini-B’ Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players, media/disk readers, USB hubs, pretty much anything small and USB.

SKU: SF-COM-14023

This will be a treat for your ears! The Hamburger Mini Speaker is a 3W economical speaker option for any project needing stand-alone sound. The Hamburger features a built-in lithium polymer battery for portable application, a 3.5mm stereo jack (sorry, iPhone 7 users) and two volume options (qu...

SKU: LB-LR0072

The Nano V3.0 CH340 is based off the famous Arduino platform, and has all the functionality of an Uno, but in a smaller package! Perfect for Arduino projects that require a small form factor (43mm by 18mm to be exact!) and do not need a DC power jack. Please note: You will need a Mini-B USB ca...